What should I do about rusting in sump?

Not as convenient because they have to be cut, zip ties also work on silicone and barbed connections.
They can be reopened and reused.
Untitled.jpg

Grab the top part (see arrow) with a pliers and twist it. The two sections will slide apart sideways. If it's on something sturdy, like a large/thick hose, you can do it with just the pliers. If it's on something smaller, you might need to grab the other part of the clamp with a second pliers to hold it still.
 
They can be reopened and reused.
Untitled.jpg

Grab the top part (see arrow) with a pliers and twist it. The two sections will slide apart sideways. If it's on something sturdy, like a large/thick hose, you can do it with just the pliers. If it's on something smaller, you might need to grab the other part of the clamp with a second pliers to hold it still.
No, i meant the zip ties weren't as convenient. Your clip is very convenient, but not everyone has them, and zip ties are pennies.
 
Stainless steel will absolutely rust in a marine environment.
A4 stainless (type 316) is the most corrosion resistant. A slight surface discoloration is the worst you'd get in a marine environment.

The problem is knowing whether you are actually getting A4/316 stainless so I wouldn't risk it in the aquarium.
 
yeah about 30 years or so. I would just change the bracket every other year or so
Then what happens to my stainless steal clamp. It has rusted in 4 months
 
Then what happens to my stainless steal clamp. It has rusted in 4 months
All products that say stainless aren’t equal… there are different grades. SS itself isn’t rust proof forever. But I can say that I have personally seen SS decking screws and trim screws last 20+ years in the salt environment…. Back the screw out and toss it back in the bucket it looks like new
 
All products that say stainless aren’t equal… there are different grades. SS itself isn’t rust proof forever. But I can say that I have personally seen SS decking screws and trim screws last 20+ years in the salt environment…. Back the screw out and toss it back in the bucket it looks like new
Yeah, we get it. You use industry standard materials for your beach carpentry business.

You're comparing apples and elephants. Clamps that aren't supposed to be exposed to corrosive environments are a world apart from something specifically made for outside/marine use.
 
Yeah, we get it. You use industry standard materials for your beach carpentry business.

You're comparing apples and elephants. Clamps that aren't supposed to be exposed to corrosive environments are a world apart from something specifically made for outside/marine use.
Not sure why we are debating a clamp…. And FYI there is marine grade clamps. https://www.plumbingsupply.com/clamps.html
 
I mean me and you with this small bickering. Not the obvious lol anyways, nice chatting
Let’s put it this way stainless steel clamps rust!!!!

End of story
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 10 23.8%
  • Powerheads or wavemakers

    Votes: 3 7.1%
  • Sump or rear filtration chambers

    Votes: 5 11.9%
  • Skimmer or other filtration equipment

    Votes: 4 9.5%
  • Overflow or plumbing

    Votes: 8 19.0%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 11 26.2%
  • Other—tell us what I missed

    Votes: 1 2.4%
Back
Top
Home
Post thread…
Market
What's new