Where to put power heads

[KiddoReefer]

 

[crazyfishmom]

I like where you’ve placed them. I would just make sure that they are not directly on top of each other. Normally you want to put one slightly higher than the other so the cones don’t completely cancel each other out.

 

[Dmmz]

Depends on if you are adding more rock and what you plan on having in the tank

 

[Mr. Mojo Rising]

I don't know if you can aim those powerheads? If not, I would raise one to try to get more agitation on the water surface.

 

[Uncle99]

From Centre (as you have them) left 2” down, 2” back, right 2” up and 2” to the front.

Either alternating flow or random if equipped, manual timer if no.

 

[KiddoReefer]

I like where you’ve placed them. I would just make sure that they are not directly on top of each other. Normally you want to put one slightly higher than the other so the cones don’t completely cancel each other out.

Thank you I adjusted them

 

[KiddoReefer]

From Centre (as you have them) left 2” down, 2” back, right 2” up and 2” to the front.

Either alternating flow or random if equipped, manual timer if no.

Thank you that is very good advice I will do that when I get home I do have them right at each other maybe that why I’m not getting a lot of movement