Which refractometer?

  • Thread starter Thread starter saltcats
  • Start date Start date
  • Tagged users Tagged users None

saltcats

Active Member
View Badges
Joined
Sep 20, 2020
Messages
422
Reaction score
435
Location
US
Rating - 0%
0   0   0
Hi all;

I've had 2 refractometers since setting up my tank in 2021. The first I'll admit was one of the cheapest ones I could find on amazon; when it broke (the blue line inside the display became crooked rather than straight across) I bought a slightly more expensive new one from an aquarium supplier this time (although the box and contents look near identical).

I've been super careful with the new one since I read that putting it down too hard could've caused that issue in the first one, although I doubt I was rough with it in the first place. But this second one has now developed exactly the same issue and I'm frustrated. I've had it barely 6 months at this point.

Is there a specific model/brand/supplier that you would recommend to avoid this? I'm guessing it's just poor build quality on the refractometers themselves (or I'm having terrible luck). I know the milwaukee is highly recommended but also $140 is fairly pricy compared to what I've spent on both of these... On the other hand buy once cry once?
My LFS carries one for about $60 but the box also looks the same as what I've got...
 
Yup. Haven't had any issues. Check it against an Amazon special (refractometer) too. BTW I would still use the ones with the slant, get some 35PPT solution and see where the line falls, most like center of the crooked line is still accurate.
 
I have a sybon from premium aquatics. I’ve had them before too. Very reliable. Only issues I get on these is rust / broken off cover plate over time. I’d like to have a Milwaukee digital too as these seem great. Then there’s always the tropic Marin hydrometer.
 
I also vote for the hanna tester, its been super accurate and reliable for me.
 
Tropic Marin Hydrometer. No calibration, just a correction for temperature. No human or tester error, extremely accurate. Literally the only downside is how fragile it can be. And maybe the size I guess.
 
Vee Gee Scientific STX-3 Handheld Salinity Refractometer with ATC, Industrial-Grade, 0-100% Salinity Range, 1.000-1.070 Specific Gravity Range, 5-Year Warranty https://a.co/d/15uuDhd

Getting pricey, but quality tester.
These have gotten too expensive to be relevant for hobbyists imo… hence my Sybon recommendation.
 
I just use a standard refractor meter that I calibrate with collaboration solutions every now and then. I’m going to eventually upgrade to the brs high precision thermometer soon.
 
I have used the Milwaukee refractometer for more almost 20 years. This summer I got the Vee Gee Scientific STX-3 and it is a very precise instrument and easier to see the scale than the Miwaukee.
The hand held Hanna tester is also good but you need to calibrate it very often (ideally each time you want to use it).
 
Why do you need to test it outside of your tank?

It is fragile and has mercury in it. You don't want it breaking in the tank. I assume the water flowing in your tank could also possibly cause a slightly inaccurate reading because the device is moving around
 
It is fragile and has mercury in it. You don't want it breaking in the tank. I assume the water flowing in your tank could also possibly cause a slightly inaccurate reading because the device is moving around
Mercury? Not in mine.. Those bits at the bottom are made of lead (at worst) but also possibly simple iron beads.
I turn off all pumps - put the hydrometer in the tank for 10 seconds, observe where the readings are and job done!
IMG_0967.JPG
 

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new