PAR Map - XR-15s with and without diffusers

[Sirlagzalott]

Some PAR readings I recently took of my (2) XR-15 Blues with and without diffusers. Tank (IM 75INT) display area is 35”x20”x19”. I also included a picture of my surface agitation as a reference.

EDIT: These are both G6’s mounted on Ecotech RMS mounts 6.5” apart. They are ~8.25” off the water’s surface.

 

[officialreefbros]

Awesome! Thanks for sharing this. It's interesting to see the difference in some areas

 

[Borat]

So basically you can save money by not buying diffusor and save par as well?

 

[BubblesandSqueak]

Some PAR readings I recently took of my (2) XR-15 Blues with and without diffusers. Tank (IM 75INT) display area is 35”x20”x19”. I also included a picture of my surface agitation as a reference.

What height to you have the XR15's at?

 

[Sirlagzalott]

So basically you can save money by not buying diffusor and save par as well?

Not trying to knock the diffusers but that was my take on it.

 

[Sirlagzalott]

What height to you have the XR15's at?

They’re mounted 6.5” apart on the RMS mounts so distance between the LED and water surface is about 8.25”

 

[Kzang]

I have 2 g5 blues, 1 g6 blue, and 2 g6 pros over a 5 ft all with diffusers. Taking them off, I can’t tell the difference so I’m just leaving them off for the normal par versus decreased with them on