tubing

Good morning! I was curious if anyone else has experienced this type of leak. I changed out my filters in my 4 stage BRS RO system and now the top of the pressure gauge is leaking. I have never had this issue before, and the water pressure going in is the same as it was prior to the filter...

I am currently planning my RODI to mixing station and AWC runs and worked out I will need quite a lot of tubing for everything (around 25-30m potentially). While looking on Teemu I found some 1/4" pvc tubing: https://share.temu.com/KGPvU9MbdLB Would this be ok to use for both RODI and the DOS?

Hello, I’m plumbing my aquarium and I’ve run into a problem with my return pump for my sump. It is the Jebao DCP-4000 and it can only fit either 3/4 inch of hard tubing or 1 inch of soft tubing. I’m hard plumbing using only 1 inch schedule 40 pvc and so I’m not sure what to do now. I’ve heard...

Does anyone know if you can use a murlok like push connect adapter with the hydros x10 DOSers? https://www.saltwateraquarium.com/4-pack-1-4-x-1-8-nptf-female-adapter-white-apex-dos-fitting-mur-lok/ I’m looking for something that will adapt to 1/4” rigid tubing.

I am planning on purchasing a prostar rimless 150 gallon setup and was wondering if anyone knows what size tubing is need for the return pump?

I’ve seen quite a few people who have drilled wall faceplates and screwed in some RODI quick connect adapters to them to get some halfway decent in wall connectors. A while ago, I thought I saw someone whole had an appropriate 1/4” keystone like insert for 1/4” tubing. Anyone know if this is a...

I have for sale a 24 foot length of Cole-Parmer Masterflex C-FLEX L/S 25 06424-25 peristaltic pump tubing. If you have a Cole-Parmer Masterflex peristaltic/dosing pump that takes this size tubing, this is a great deal. You’ll need to research what size tubing your CP pump requires, so be sure...

I’ve printed dosing tubing holders that clamp on to your tank, whether rimmed or rimless. They fit up to 1” glass or acrylic. They hold 1/4” tubing securely with a little wiggle room for smaller or larger tubing. They are made from PETG, so completely reef safe. You can choose from Black, Green...

What is the most effective and most aesthetically appealing way you have found to mount or brace your plumbing/tubing? I am planning a new build, and I want the plumbing to look real good. I'm inspired by server room organization and t-track woodworking accessories, but I haven't found the right...

I'm refining my doser tubing path/plumbing to neaten up the sump a bit... I'd like to continue to use the "regular" more rigid refrigerator type waterline tubing between the reservoir and the doser. Then I would like to use the more flexible 1/8" ID silicone tubing between the doser and the...

The two go together like PB+J. My current build uses quite a bit of soft silicone tube, and I get a lot of growth in these lines, and meaning that adjustments to the overflow and return are common. While keeping them out of light is the obvious option, and has worked quite well for some of my...

Can I use the regular airline tubing like what I have for my beta tank from Walmart to join together two small rocks in my reef? Is it inert and will it hurt anything?

Anyone want to offer thoughts on my use of silicone airline tubing for my dosing lines? I've had this setup for almost a year and set a reminder to check how they're holding up - all seem fine. I'm pushing Alk, Ca, Mg and NoPoX through them. Just come to calibrate my Apex Dos which I use for...

Hello Reefers- I have a Red Sea Reefer 250. My Vectra S1 return pump is arriving tomorrow and I'm not sure if it comes with any connectors/adapters to fit the green tubing that came with the red sea reefer. Can I connect the green tubing directly into the S1, or will I need some sort of barb...

I just got my 25ft order of black 1" vinyl tubing from Marine Depot to setup my 180. The problem is it's kinked at both the left & right sides of the circle it's wound in. Every single piece. One piece is a 90° kink. I figured I'd try theirs. I usually go with the Lee's Black Pond Tubing, but...