MaineReefkeeper
Community Member
- Joined
- Apr 27, 2019
- Messages
- 64
- Reaction score
- 28
Figured I’d finally start a build thread. Been reefing for over 20 years and I’ve never really done one or been consistent with the couple I have started. Hoping to change that this time around. Tank was started 2/29/20 and is currently cycling.
Display: Waterbox 10
Rock: NanoRox custom piece
Sand: None. Going bare bottom on this one
Lighting: AI Prime 16HD
Heater: Neotherm 75
Circulation: Upgraded return pump only. Eheim CompactON 1000. RFG nozzle
ATO: XP Aqua
Filtration: Intank media basket in chamber 1 with filter floss, Bio Pure Spheres in chamber 2
Tank Modifications: Drilled out the return to accept a 1/2” bulkhead to increase flow from the return pump and allow the use of the 1/2” RFG nozzle.
More to come.
Display: Waterbox 10
Rock: NanoRox custom piece
Sand: None. Going bare bottom on this one
Lighting: AI Prime 16HD
Heater: Neotherm 75
Circulation: Upgraded return pump only. Eheim CompactON 1000. RFG nozzle
ATO: XP Aqua
Filtration: Intank media basket in chamber 1 with filter floss, Bio Pure Spheres in chamber 2
Tank Modifications: Drilled out the return to accept a 1/2” bulkhead to increase flow from the return pump and allow the use of the 1/2” RFG nozzle.
More to come.
Last edited:
