tbrown
Cronies #3?? Heathens' Coffee Snob???
View Badges
Ultimate Member
Reef Squad
Reef Squad Leader
Excellence Award
Reef Tank 365
R2R App User
Article Contributor
Hospitality Award
Rock Pool Reef Keepers
My Tank Thread
My Aquarium Showcase
So not the prettiest but it works and I was able to incorporate a couple of frag racks into the design.
Internal refugium - had the library 3D print some hangers for it but they used 15% infill and they broke after about a week. The suction cups just don't hold so I bent some egg crate from the 75 gallon lid and made a stand. It's buried in the sand front and back so it's making contact with the bottom. Has a single frag point on the side middle at the top, a single frag point on the back about halfway up the leg, a 2-3 frag racks on the front middle, and then each front leg has a 1-3 frag rack about halfway up. I'm thinking the red Monti cap will be attached vertically on one leg, the Red Hulk Monti cap in the other leg same way.
I have a Mint or Cactus Pavona that is really close to starting to encrust in the back corner (because the rack is almost exactly where it was already), a ROAB Digitata front and center, the red Monti cap on the "back" front leg, the JKR Golden Gate Galaxea on the front leg, and a Milka Stylo on the top side (at the front glass). I have room for at the most 7 more - 2 higher light medium flow, 1 low light low flow, and 4 medium light medium flow. I can also attach some encrusters on the legs vertically if I so desire, which I will eventually, or possibly some medium/high light medium flow sticks. We'll see. The possibilities are endless!
Until then, it's just ugly, plain old white egg crate.
Internal refugium - had the library 3D print some hangers for it but they used 15% infill and they broke after about a week. The suction cups just don't hold so I bent some egg crate from the 75 gallon lid and made a stand. It's buried in the sand front and back so it's making contact with the bottom. Has a single frag point on the side middle at the top, a single frag point on the back about halfway up the leg, a 2-3 frag racks on the front middle, and then each front leg has a 1-3 frag rack about halfway up. I'm thinking the red Monti cap will be attached vertically on one leg, the Red Hulk Monti cap in the other leg same way.
I have a Mint or Cactus Pavona that is really close to starting to encrust in the back corner (because the rack is almost exactly where it was already), a ROAB Digitata front and center, the red Monti cap on the "back" front leg, the JKR Golden Gate Galaxea on the front leg, and a Milka Stylo on the top side (at the front glass). I have room for at the most 7 more - 2 higher light medium flow, 1 low light low flow, and 4 medium light medium flow. I can also attach some encrusters on the legs vertically if I so desire, which I will eventually, or possibly some medium/high light medium flow sticks. We'll see. The possibilities are endless!
Until then, it's just ugly, plain old white egg crate.
Last edited: