125 - Took Forever But Here It is!

[tbrown]

I must do this now!

Your kids will either love be it or never sleep again...

 

[F i s h y]

Your kids will either love be it or never sleep again...

When it happens I'll post pics for sure! @Mrs.F i s h y says oh no problem we will use eye lash glue...

 

[Reefing_addiction]

@Mrs.F i s h y yes tell him it’s eyelash glue ;)

 

[Mrs.F i s h y]

@Mrs.F i s h y yes tell him it’s eyelash glue ;)

;) ;) ;)

 

[Reefing_addiction]

;) ;) ;)

I already like you more lol

 

[stoney7713]

She's a pirate!!!

 

[Projects with Sam]

@Mrs.F i s h y yes tell him it’s eyelash glue ;)

Omg! My boy-child would’ve benefited if I read this before the crazy glue!

 

[tbrown]

Well, we'll see how this goes. I started a 4 hour print for the air lifter for my Tenecor Pico. I didn't use a brim and the walls are fairly skinny. It's almost 8" tall so it may or may not be a successful print without the brim.

 

[stoney7713]

Well, we'll see how this goes. I started a 4 hour print for the air lifter for my Tenecor Pico. I didn't use a brim and the walls are fairly skinny. It's almost 8" tall so it may or may not be a successful print without the brim.

It's a night and day difference with my Ender and Bambu. Even though it's a z screw on the Ender, there's only support in the rear of the plate, not the front. I think that is the reason for so much Z wobble.

 

[tbrown]

Still standing.

 

[stoney7713]

Still standing.

 

[Reefing_addiction]

Still standing.

 

[tbrown]

Well, it failed. That last picture was about it. Shortly after that the nozzle clogged. :disappointed-face: I think I'm going to redesign it and make the airlift tube and the 90 two different pieces.

 

[stoney7713]

It's great printing things in one piece. Sometimes some assembly is just easier.

 

[tbrown]

It was the supports that clogged the nozzle I'm pretty sure. The Airlifter was 5 grams of filament, the supports were 15 grams of filament.

 

[Projects with Sam]

It was the supports that clogged the nozzle I'm pretty sure. The Airlifter was 5 grams of filament, the supports were 15 grams of filament.

Sometimes it’s easier to just design and print the ends that interface with pvc or pex pipe for the body.

 

[907_Reefer]

 

[Reefing_addiction]

I want a pair! But they need their mouths taped shut

 

[tbrown]

Sometimes it’s easier to just design and print the ends that interface with pvc or pex pipe for the body.

Yeah. I'll probably print the 90 and then maybe a sleeve that slips inside.

 

[Reefing_addiction]

So what are you making?

I’m to lazy to go back and find out