- Joined
- Apr 16, 2020
- Messages
- 3,038
- Reaction score
- 7,930
At the rate you're going Noah, you're going to be back at the 20 long
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have a 24x18 stand I can’t do anything with different dimensionsAt the rate you're going Noah, you're going to be back at the 20 long
There’s a marine land 45g for 239$ could I set it up to be a macro tank for 100$?
YeahLike $100 extra?
So 339$ For equipment and ro
@elorablue how can I make sure the top panel is 100% level, when I get to drilling it should I clamp it to the table?
Could I put it through a planer? To shave a teeny tiny bit offWell, you start off by making every piece EXACTLY the same size. Exactly, not a 1/32" of a difference because dimensional errors compound themselves.
You'll need some sort of square, your school probably has a framing square . Then before drilling, clamp all the pieces together on a dead flat surface. A sheet of plywood or melamine is good for that. Then check that your construction is square by measuring the diagonals, they need to be EXACTLY the same..
Then if you plan on placing something on top of the structure I would recommend a ply or melamine again.
I mean, ya aint makin' a piano here
Does the make any sense?
The stand is designed to go for 24x18 I cannot change itIf you have the extra 100$ for the 45 gallon why don't you go for the 20 gallon long instead?
I can’t do that I have a 24x18 stand not a 36x18 stand
Chocolate chip star fishOh the asternia? Are they difficult to culture
Oh my mom loves thoseChocolate chip star fish
NiceThis is pics from my 40 gallon breeder 7 years ago.
Left and right side
I had a petco 40 breeder and two koralia powerhead and a $100 chinese LED. I was a poor college student and also on a budget.