1500 gal reef tank

Also the amount of flow. It's a very long tank. Fluid dynamics in that tank might be challenging. But I am not as worried. Over all it looks awesome.

I use 4 Gyres (2x150's and 2x230's) in my 8 ft long 320, I think 8 Gyres will do the trick here ! 4 along the back wall and 2 at either end.
 
52feeb0c6db82c96820eb85437c31f4f.jpg
 
Are you getting enough flow from the 4 SeaSwirls located in the center? I'm going to do a 340 later this year 96x30x30 split between two rooms like you have, sump will be in the basement in its own room with plenty of room for whatever I need to do the best filtration. Have been wrestling with doing SeaSwirl, OceansMotion, Vortech or a combination. Will have ghost overflows on the ends. Love the look of OceansMotion but don't want to drill a ton of holes in the bottom of the tank unless someone can tell me not to worry about it. Then was thinking I would do 6 SeaSwirls, 2 in each corner connected to two return pumps and two in the center closed loop. I can add Vortechs to the end later if not enough flow. Plan is for SPS dominant with heavy fish. I don't want a ton of hoses/pipes/wires in the tank so was thinking of this design. I have a customer with a SeaSwirl in a 500 gallon tank, but it is fish only and it works well, but no idea how well it would be with coral. SewaSwirl was one of the original flow devices and I remember people used them a lot, then everyone got on the Vortech bandwagon. I don't see any comparisons anymore between them and the newer technologies. Thoughts?

Also, was looking to do RollerMat sold by BRS. Never heard of the SeaVisions device before but looks rock solid! Do you know how the compare, any recommendation on either?

Thanks!
 
Ive got The 4 seaswirls ,two gyre in the center and 2 tunze on each side I'd you might want 1 more good power head located a little lower in the tank I'm each side as well
 

TOP 10 Trending Threads

WHEN BUYING EQUIPMENT YOUR REEF WILL DEPEND ON, WHAT MATTERS MOST TO YOU?

  • Long-term reports from other reefers

    Votes: 4 57.1%
  • My own past experience with the brand

    Votes: 0 0.0%
  • A simple design I can understand and maintain

    Votes: 1 14.3%
  • Warranty and responsive customer support

    Votes: 1 14.3%
  • Independent testing or detailed reviews

    Votes: 1 14.3%
  • Advice from an LFS or reefer I personally trust

    Votes: 0 0.0%
  • Being able to keep a spare or build in redundancy

    Votes: 0 0.0%
  • Something else? Tell us in the comments

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new