So this is my favorite forum and wanted to do a build thread on this tank, being it's not a reef tank it was suggested to do the build here. At one time I had a 5 gallon planted with a hang on the back filter. It was nice but in the end I tore it down. So finally resurrecting my office planted tank, I would do a reef but the AC is not very dependable and the planted can take that better. Plus we have an RO system at work so I don't have to haul special water to the office for water changes and stuff. After much shopping around I went with a fiji cube 11 gallon cube AIO. But wait....title says 22 gallon. So as it turned out their website had not been updated and the 11 gallon was out of stock. Customer service was excellent and they decided to offer me the 22.4 at 15% off and I took it. Ordered some extra substrate and little bigger heater and we are good to go. Everything was ordered today so I will post pictures when stuff starts coming in.
Tagged a couple of people I know were interested.
Tank
17" x 17" x 16.5" fiji cube with low iron glass
Substrate: I ordered two bags of flourite dark for a cap. I will use stones and aquarium gravel to get height in the scape but will be capped off with the flourite.
Two pieces of tiger wood root, not sure if I'll use both
A mix of dragon stone and elephant stone.
Equipment
AI prime freshwater, with mounting arm
100w titanium finnex with analog controller
temp prob (I have read this version of the finnex is way off so wanted this to determine temp)
fiji cube return pump
co2: using paint ball canisters with electric cylinoid and regulator
(@Dsnakes, @crusso1993, @Lowell Lemon )
Tagged a couple of people I know were interested.
Tank
17" x 17" x 16.5" fiji cube with low iron glass
Substrate: I ordered two bags of flourite dark for a cap. I will use stones and aquarium gravel to get height in the scape but will be capped off with the flourite.
Two pieces of tiger wood root, not sure if I'll use both
A mix of dragon stone and elephant stone.
Equipment
AI prime freshwater, with mounting arm
100w titanium finnex with analog controller
temp prob (I have read this version of the finnex is way off so wanted this to determine temp)
fiji cube return pump
co2: using paint ball canisters with electric cylinoid and regulator
(@Dsnakes, @crusso1993, @Lowell Lemon )
Last edited: