280 Gallon Gyre XF 350 Placement

  • Thread starter Thread starter Otown78
  • Start date Start date
  • Tagged users Tagged users None

Otown78

New Member
View Badges
Joined
Feb 8, 2015
Messages
17
Reaction score
3
Location
Orlando Fl
Rating - 0%
0   0   0
I have a 280 Gallon with 2 Gyre XF350s
I have one place high towards the top of the tank on the right
The left side i have lower portion of the tank.

What would be the best placement? Fish only, however i do have some GSP growing for a natural look.

My problem is i am getting a lot of algae on the sandbed. Tank is just 7months old. However i only have the Blues at like 25% .. Whites,Reds and Greens are off..
Lights are 16inches off the top of the tank - Cant go higher without some bigger modifications.

Nitrates are low, Phosphates are a little high, they were .5 did a 60 gallon water change and they came down to .3

I was thinking my algae issues are the phosphates and maybe a lack of flow across the bed?

Im going to run RowaPhos and try to reduce the Phosphates to .1ish

Any Suggestion would be appreciated.
 
I have a 280 Gallon with 2 Gyre XF350s
I have one place high towards the top of the tank on the right
The left side i have lower portion of the tank.

What would be the best placement? Fish only, however i do have some GSP growing for a natural look.

My problem is i am getting a lot of algae on the sandbed. Tank is just 7months old. However i only have the Blues at like 25% .. Whites,Reds and Greens are off..
Lights are 16inches off the top of the tank - Cant go higher without some bigger modifications.

Nitrates are low, Phosphates are a little high, they were .5 did a 60 gallon water change and they came down to .3

I was thinking my algae issues are the phosphates and maybe a lack of flow across the bed?

Im going to run RowaPhos and try to reduce the Phosphates to .1ish

Any Suggestion would be appreciated.
I like the two gyres alternating across the top of the tank - it should be quite good at circulating. I would siphon the algae - and monitor your parameters (as you suggested) Algae grows in high flow areas.
 
I do not stir or vacuum my sand. I have a Diamond Watchman Goby that does all that for me. 350 gyres on either end of my 8ft 300g run for 5 minute opposite each other at about 70% I guess, but I have 3 mp40's on the back wall doing a variety of things that help a lot. I never see detritus on my sand.

20241027_101756.jpg

oct2724.jpg
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 3 20.0%
  • Fish or coral food

    Votes: 2 13.3%
  • Test kits or reagents

    Votes: 2 13.3%
  • Filter media or replacement fleece

    Votes: 1 6.7%
  • RO/DI filters or supplies

    Votes: 2 13.3%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 2 13.3%
  • I keep a backup of everything

    Votes: 2 13.3%
  • Other (Post in the comments)

    Votes: 1 6.7%
Back
Top
Home
Post thread…
Market
What's new