4" filter socks not exactly the same size?

[Gobi-Wan]

I made my own sump from a 40 breeder and cut holes for filter socks based on the original set I had. The original set has about 1/4" of wiggle room in the holes. When i tried finding replacements, they are also clearly 4" filter socks... but can't quite be wedged into the holes. Apparently there is some discrepancy in filter sock sizes... has anyone noticed this and maybe could recommend brands that fit a little smaller?

 

[Who me?]

Eshopps, waterbox, Red sea all seem to run around the same size and a bit smaller than others.... There may be others as well.

 

[Gobi-Wan]

Eshopps, waterbox, Red sea all seem to run around the same size and a bit smaller than others.... There may be others as well.

thank you!

 

[Reef Diaper Verified Sponsor]

Our standard flanges fit 3-3/4" inch bores. We also sell a custom 3-1/2" version on our website. Follow the link below for more info and let me know if you have any questions.

 

[Who me?]

Our standard flanges fit 3-3/4" inch bores. We also sell a custom 3-1/2" version on our website. Follow the link below for more info and let me know if you have any questions.

Neat concept. Have you considered making 2" size?

 

[Gobi-Wan]

Our standard flanges fit 3-3/4" inch bores. We also sell a custom 3-1/2" version on our website. Follow the link below for more info and let me know if you have any questions.

I measured and the bores are 3-1/2" so that would be perfect. do they use the same filter elements as the 3-3/4's?

 

[Reef Diaper Verified Sponsor]

Neat concept. Have you considered making 2" size?

Sorry, we don't have plans for a 2" Reef Diaper at this time.

 

[Reef Diaper Verified Sponsor]

I measured and the bores are 3-1/2" so that would be perfect. do they use the same filter elements as the 3-3/4's?

Yes, the 3-1/2 flanges use the same elements as the standard 3-3/4" Reef Diaper.