I need some advice on powerheads and placement.
My existing tank is 72”x18”x23” and I have two MP40 and a MP60. The tank is going to be replaced with a tank 84”x30”30”.
I was thinking the following:
4 MP40 on the back wall of the Tank
2 MP60 Right side of the tank, and 2 MP40 on the back wall.
2 Panta Rhei Pro 43 on the Right Hand side of the Tank.
I would like to keep the left side tank free of power heads but can place them their if need be.
The tank will have two 1-inch returns, on the left and right side back wall of the tank and the overflow is an external overflow.
I am open to anything and everything as this is a new tank upgrade.
Thanks
My existing tank is 72”x18”x23” and I have two MP40 and a MP60. The tank is going to be replaced with a tank 84”x30”30”.
I was thinking the following:
4 MP40 on the back wall of the Tank
2 MP60 Right side of the tank, and 2 MP40 on the back wall.
2 Panta Rhei Pro 43 on the Right Hand side of the Tank.
I would like to keep the left side tank free of power heads but can place them their if need be.
The tank will have two 1-inch returns, on the left and right side back wall of the tank and the overflow is an external overflow.
I am open to anything and everything as this is a new tank upgrade.
Thanks