Alakalinity Spikes

  • Thread starter Thread starter jordanrb
  • Start date Start date
  • Tagged users Tagged users None
My calcium has a slight drop after a few weeks. Around 10ppm so I dose a little calcium to bring it back up. If I raise my AFR dose my alkalinity raises
Not sure 10pm calcium drop is even worth worrying about.
shrug-icegif-13.gif
 
using a calcium ion vs organic calcium would help keep calcium more stable unless your would prefer organic calcium due to corals

A few comments:

1. There's no reason to think the polygluconate stays on the calcium once added.
2. There's no reason to think a coral would more readily take up organically bound calcium.
3. The problem with organically bound calcium is not lack of calcium stability (it may, in fact, be more stable if chelated strongly enough to retain it in the aquarium), but that if the organic is metabolized, it will add alkalinity.
 
My calcium has a slight drop after a few weeks. Around 10ppm so I dose a little calcium to bring it back up. If I raise my AFR dose my alkalinity raises

I expect that is test error if alkalinity is being maintained.

AFR actually adds slightly more calcium than alkalinity, and so will maintain calcium if you are adding enough to maintain alkalinity (and are not adding alk some other way).
 
I expect that is test error if alkalinity is being maintained.

AFR actually adds slightly more calcium than alkalinity, and so will maintain calcium if you are adding enough to maintain alkalinity (and are not adding alk some other way).
Ok that is good to know. I am using salifert so being off 10ppm isnt hard to do.
 
I expect that is test error if alkalinity is being maintained.

AFR actually adds slightly more calcium than alkalinity, and so will maintain calcium if you are adding enough to maintain alkalinity (and are not adding alk some other way).
I just had the same issue again. I made sure not to dose anything. Did my daily dose of AFR. Kept within 0.2dkh for the two weeks until my water change was due. All of a sudden I went from 8.2dkh to 8.9dkh within 48hrs. I test alkalinity every other day.

Is there something else I could be missing here?
 
I just had the same issue again. I made sure not to dose anything. Did my daily dose of AFR. Kept within 0.2dkh for the two weeks until my water change was due. All of a sudden I went from 8.2dkh to 8.9dkh within 48hrs. I test alkalinity every other day.

Is there something else I could be missing here?

That new salt water had what alk?

Remote possibility is that bacteria processing the formate in AFR might be limited in growth by a trace element that the water change adds, they grow faster, and convert the accumulated formate into measurable alk.
 
That new salt water had what alk?

Remote possibility is that bacteria processing the formate in AFR might be limited in growth by a trace element that the water change adds, they grow faster, and convert the accumulated formate into measurable alk.
Sorry I should have been more specific. I checked before my water change to make sure my reading were accurate with the AFR
 
Sorry I should have been more specific. I checked before my water change to make sure my reading were accurate with the AFR

I was asking about the water change water itself. :)
 
I was asking about the water change water itself. :)
It was 8.2dkh. Its where I try to keep my water at.

I should add I dose it to raise alkalinity as the current batch of salt I have is only mixing to 6.8dkh consistently every time.
 

TOP 10 Trending Threads

WHAT IS THE LOUDEST PART OF YOUR REEF SYSTEM?

  • Return pump

    Votes: 1 2.9%
  • Powerheads or wavemakers

    Votes: 1 2.9%
  • Protein skimmer

    Votes: 9 25.7%
  • Overflow or drain

    Votes: 10 28.6%
  • Sump vibration or plumbing

    Votes: 0 0.0%
  • Cooling fans

    Votes: 5 14.3%
  • Dosing, ATO, or other equipment

    Votes: 1 2.9%
  • Nothing. My reef is surprisingly quiet

    Votes: 7 20.0%
  • Other (Tell us what makes the noise)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new