- Joined
- Feb 19, 2018
- Messages
- 3,224
- Reaction score
- 4,802
- Location
- down under
- What state or country do you live in
- Other International
Nothing negative about running an ATS on a dedicated pump, just like a skimmer, a bio pellet reactor, etc.Most set ups I’ve seen have a pump from sump feeding ats. Simply because it’s easier, and most tanks have way too much return flow for what’s recommended for their ats, even if ats is oversized. Sure you could run a split.
The diagram I posted shows that when the scrubber is fed from the display overflow a tank's turnover rate can just be set to match the scrubbers flow specs. Why have a higher tank turn over rate than what the scrubber needs? No reason for that. Using a variable speed pump makes this easy. Or you can split & run a 2nd feed to a gravity fed GAC reactor, of filter material, for example as I have done.
And the diagram I posted shows that there is relatively no open area in the sump from where evaporated water can escape the system. It condenses on the inner surfaces of the sump unit & drips back in to the sump water.Water falling down in open air is part of what makes an ats so powerful, because nitrogen leaves the water at the surface. This will also cause more evap. Simple concept.
