Algae Scrubber Lighting

Windy

Active Member
View Badges
Joined
Jun 1, 2014
Messages
483
Reaction score
86
Location
Oregon
Rating - 0%
0   0   0
I recently built an algae scrubber and used lights recommended by Floyd R Turbo. Now of course he has revised his mantra on LEDs and the original lights were not strong enough. Be careful who you take advice from. So, having to re-light my ATS, I decided to build them myself. I went with LEDs and I will have 42 watts of LEDs on each side of my screen. Here is what I am using.

Assembly of LEDS:








Ready for installation:

 
Last edited:
OP
OP
Windy

Windy

Active Member
View Badges
Joined
Jun 1, 2014
Messages
483
Reaction score
86
Location
Oregon
Rating - 0%
0   0   0
Here is the installation:
The screen from the old lights:



In the cabinet:



Wiring harness:



Light test:



Complete:

 

DFW

Active Member
View Badges
Joined
Sep 11, 2014
Messages
446
Reaction score
17
Location
Fort Worth, Texas
Rating - 0%
0   0   0
Wow! What a setup! Your screen looks like mine does after about 1 week. I use fluorescent bulbs in reflectors - one a 19 watt, and the other side a 23 watt. I run them 18 hours/day, and usually go 3 weeks between cleanings.
 
OP
OP
Windy

Windy

Active Member
View Badges
Joined
Jun 1, 2014
Messages
483
Reaction score
86
Location
Oregon
Rating - 0%
0   0   0
Is that more so slim then hair algae?

The outside area is a lot of slime. The middle is gradually tuning into green hair algae. Also as it matures, there is less algae in my system and my macro algae is failing.
 

tigerdragon

Valuable Member
View Badges
Joined
May 23, 2014
Messages
1,050
Reaction score
42
Location
Nor Cal
Rating - 0%
0   0   0
What lighting on macro and does it get nutrients? My scrubber is in with my macro and rock rubble but gets light from scrubber, all is fed from rtn manifold pulled socks so fuge gets nutrients macro is growing like mad
 
OP
OP
Windy

Windy

Active Member
View Badges
Joined
Jun 1, 2014
Messages
483
Reaction score
86
Location
Oregon
Rating - 0%
0   0   0
You can research this for yourself, but what I have read says the macro algae will die because the algae scrubber will take the nutrients out of the water. You might house it separately and feed it, but my experience is it will succumb to the more efficient algae scrubber.
 
OP
OP
Windy

Windy

Active Member
View Badges
Joined
Jun 1, 2014
Messages
483
Reaction score
86
Location
Oregon
Rating - 0%
0   0   0
I just replaced the enclosure with glass and reduced the screen width as well.
 

SantaMonica

2500 Club Member
View Badges
Joined
Sep 16, 2008
Messages
2,732
Reaction score
1,107
Location
Salt Lake City, Utah, USA
Rating - 0%
0   0   0
You might house it separately and feed it, but my experience is it will succumb to the more efficient algae scrubber

Yes correct, it does not matter where the scrubber is, because the nutrients will be the same levels in the water.
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 2 4.5%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 3 6.8%
  • Feed nori to support CUC

    Votes: 17 38.6%
  • Feed herbivore pellets to support CUC

    Votes: 11 25.0%
  • Allow attrition to balance CUC and algae

    Votes: 22 50.0%
  • Provide macro algae to feed CUC

    Votes: 5 11.4%
  • Introduce CUC predators

    Votes: 1 2.3%
  • Other (please explain)

    Votes: 4 9.1%
Back
Top