Alkalinity and Carbon Dosing

  • Thread starter Thread starter NDIrish
  • Start date Start date
  • Tagged users Tagged users None

NDIrish

Well-Known Member
View Badges
Joined
Jun 27, 2019
Messages
590
Reaction score
718
Location
Jackson, TN
What state or country do you live in
Tennessee
Rating - 0%
0   0   0
Needing to understand why it is recommended when carbon dosing you have your alkalinity between 7 - 8?
 
So I was reading about it and apparently with low nutrients and high alk the skeleton of the coral will grow faster on the ends than the tissue can keep up with. The high alk encourages skeletal growth but the lower nutrients limit tissue growth.. Which causes the tissue to be too thin for the amount of light it is receiving, which leads to the burnt tips that I often hear about.

Someone please correct me if I've misunderstood why low nutrients with higher alk is an issue.
 
Needing to understand why it is recommended when carbon dosing you have your alkalinity between 7 - 8?

That is not an appropriate/needed recommendation.

It stems, misleadingly, from the correct idea that if nutrients are low and alkalinity is high, that certain SPS corals can get "burnt tips", which may be due to the coral skeleton growing faster than the tissue can keep up.

With all nutrient reduction methods, if one wants to maintain high alk, then one needs to be sure that an adequately large source of N and P is available.

It is certainly not the case that organic carbon dosing necessarily leads to low nutrients. Same as other methods: used too much, in some cases, nutrients may get too low. used appropriately for the given aquarium system, there is no concern.
 
That is not an appropriate/needed recommendation.

It stems, misleadingly, from the correct idea that if nutrients are low and alkalinity is high, that certain SPS corals can get "burnt tips", which may be due to the coral skeleton growing faster than the tissue can keep up.

With all nutrient reduction methods, if one wants to maintain high alk, then one needs to be sure that an adequately large source of N and P is available.

It is certainly not the case that organic carbon dosing necessarily leads to low nutrients. Same as other methods: used too much, in some cases, nutrients may get too low. used appropriately for the given aquarium system, there is no concern.

Great info! Thanks, Randy.
 
That is not an appropriate/needed recommendation.

It stems, misleadingly, from the correct idea that if nutrients are low and alkalinity is high, that certain SPS corals can get "burnt tips", which may be due to the coral skeleton growing faster than the tissue can keep up.

With all nutrient reduction methods, if one wants to maintain high alk, then one needs to be sure that an adequately large source of N and P is available.

It is certainly not the case that organic carbon dosing necessarily leads to low nutrients. Same as other methods: used too much, in some cases, nutrients may get too low. used appropriately for the given aquarium system, there is no concern.
Thanks Randy. Appreciate your input.
 
That is not an appropriate/needed recommendation.

It stems, misleadingly, from the correct idea that if nutrients are low and alkalinity is high, that certain SPS corals can get "burnt tips", which may be due to the coral skeleton growing faster than the tissue can keep up.

With all nutrient reduction methods, if one wants to maintain high alk, then one needs to be sure that an adequately large source of N and P is available.

It is certainly not the case that organic carbon dosing necessarily leads to low nutrients. Same as other methods: used too much, in some cases, nutrients may get too low. used appropriately for the given aquarium system, there is no concern.
With this in mind, is there a way to determine how much carbon dosing is needed other than incessant testing with incredibly inaccurate hobby level test kits (namely nitrate)?

For example: Add "x" amount of this solution for "x" amount of time to decrease nitrate/phosphate by "x" amount.

Do the bacteria that are produced from carbon dosing remove nutrients at a set rate once a set dosage has been established?
 
With this in mind, is there a way to determine how much carbon dosing is needed other than incessant testing with incredibly inaccurate hobby level test kits (namely nitrate)?

For example: Add "x" amount of this solution for "x" amount of time to decrease nitrate/phosphate by "x" amount.

Do the bacteria that are produced from carbon dosing remove nutrients at a set rate once a set dosage has been established?

Not really. Trial and error is the only way.

There are many different processes that impact N, P and organics. Some are linked to one another (e.g., N and P going into normal tissue growth) and some are not (nitrate and organics being consumed by denitrification that does not deplete phosphate)..
 
How do you determine when to stop increasing the amount of vinegar and to maintain a certain level?
I'm dosing 32 ml a day and my N is between 0 and 25 (by colorchart it's not as dark as 25 but it is not clear), my P is .06.
Thanks
 
How do you determine when to stop increasing the amount of vinegar and to maintain a certain level?
I'm dosing 32 ml a day and my N is between 0 and 25 (by colorchart it's not as dark as 25 but it is not clear), my P is .06.
Thanks

Trial and error.

But IMO, a kit that cannot readily distinguish 25 ppm from 1 ppm is not adequate to control dosing.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 20.0%
  • I decorate AROUND the tank or stand

    Votes: 1 20.0%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 3 60.0%
  • We don’t decorate for the holidays

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new