Ammonia after using prazipro HELP

[Jmas4]

I did a 75 percent water change and I added a live rock from my dtarter I will post ammonia shortly

 

[Greenstreet.1]

If you can get some water from you DT to seed the qt that may help. With prazi in the qt you should not add any other meds

 

[Jmas4]

After water change it is at .25 to.5

 

[_Conway]

After water change it is at .25 to.5

I would add prime. Any amount of amonia can be dangerous.
If LR doesn't work in 24 hr. You may need bacteria in a bottle.
Alot of people do add with prazi treatment.
Maybe add air bubbler to keep oxygen up if that's a concern.

 

[cmcoker]

I would add prime. Any amount of amonia can be dangerous.
If LR doesn't work in 24 hr. You may need bacteria in a bottle.
Alot of people do add with prazi treatment.
Maybe add air bubbler to keep oxygen up if that's a concern.

Agreed after that large water change should be fine to add an ammonia reducer

 

[Jmas4]

Ok guys thank u for your help:D

 

[_Conway]

Why didn't you just add the prazipro to your main tank it's reef safe

I'm not sure I would but Alot of people have been successful adding it to reef.
Manufacturer recommends not to.

 

[Jmas4]

My fish never came from my reef it came from a lfs

 

[Myka]

I've used Prime with Prazi with no issues. I wouldn't have let that ammonia sit in there that long. Those poor fishies. Get a SeaChem Ammonia Alert badge. It gives you live ammonia readings and lasts a year. It's less than $10 and worth its weight in gold for a QT imho.

 

[Jmas4]

I've used Prime with Prazi with no issues. I wouldn't have let that ammonia sit in there that long. Those poor fishies. Get a SeaChem Ammonia Alert badge. It gives you live ammonia readings and lasts a year. It's less than $10 and worth its weight in gold for a QT imho.

I have it but it shows safe but it was used in salt anf freshwater so I used api and that is what it said 1.0 to 2.0 now it is .25 and I have live rock

 

[Reefahholic]

Just use some Amquel or Prime until the tank cycles.

 

[Jmas4]

I have a seachem ammonia checker and it says safe but it has been used in saltwater and freshwater so idk if it is accurate so instead I am using api ammonia checker and it says 0.5. I have live rock in my qt (no copper yet) but ammonia is still rising again. What should I do?

 

[Bdog4u2]

Add more rock and a pump to move water so the rock can process the ammonia and if you you have rock rubble in your main tank put it in your hob filter

 

[Brian Kim]

Please do NOT use copper if you decide to use prime or any water conditioner on your QT tank.
I would personally stay away from all those conditioners and deal with ammonia by doing large water changes. Bio Spira will also speed up your cycling process.

*from someone who has set up multiple last minute QT tanks*

 

[Myka]

In the long term, live rock or bioballs or whatever is a good idea, but in the short term, ammonia burn can permanently scar a fish's gills or kill them. I would have added Prime before I even added the fish to begin with. Just don't mix Prime with copper.