AN ACCURATE AND PRECISE METHOD FOR MEASURING IODINE

taricha

5000 Club Member
View Badges
Joined
May 22, 2016
Messages
6,605
Reaction score
10,196
Rating - 0%
0   0   0
Regardless, it sounds like using the HI713 will at least put me in the ballpark and prevent me from going much too high.
I agree with this.
 

drawman

2500 Club Member
View Badges
Joined
Feb 27, 2016
Messages
3,553
Reaction score
3,614
Location
Florida
Rating - 0%
0   0   0
Wanted to show off using this in my tank.
My system runs essentially zero Iodine when I don't add it.

I measured baseline tank water, and then added Red sea Trace A (Iodine) that should raise Iodine to 0.060ppm Measured again 30 min later and again 4hr later.

Hours60s180sFCDtempcalc ppm
0.03843810.007868.20.002
0.83342640.209668.40.066
4.33402810.173568.40.055
This was using the recommended checker, the hi707.


...but you can use one of the hanna checkers at 525nm green LED, like the PO4 checkers and you get almost the same thing. Because it works by measureing the fraction of color removed, so the actual values of the readings don't matter.
So here's same water samples tested with a different checker with a green LED.
60s180sFCDtempcalc ppm
117900.230768.50.073
1251030.176068.50.056


So here's what it looks lijke comparing the two. Almost the same regardless of which checker and whether the LED is blue or Green.
Screen Shot 2023-02-03 at 10.41.01 PM.png

I obtainec good results using the LR Phosphate Checker.
@Rick Mathew @Dan_P @taricha you guys are awesome I want to thank you for putting this work in.

I'm going to place an order for the supplies and will report back.
 

drawman

2500 Club Member
View Badges
Joined
Feb 27, 2016
Messages
3,553
Reaction score
3,614
Location
Florida
Rating - 0%
0   0   0
@Rick Mathew one thing I noticed in your video is your A & B reagents had a hanna sticker on them are you using something different?

Just making sure this is the right reagents...

 
OP
OP
Rick Mathew

Rick Mathew

Valuable Member
View Badges
Joined
Mar 21, 2016
Messages
1,472
Reaction score
4,736
Location
North Central Florida
Rating - 0%
0   0   0
@Rick Mathew one thing I noticed in your video is your A & B reagents had a hanna sticker on them are you using something different?

Just making sure this is the right reagents...

This is the correct reagent kit. Very observant about the Hanna containers! I used some old Alk reagent bottles to put the Red Sea reagents in. It makes them much more accessible than the dropper containers for using the pipette.
 

Good trouble: Have mushrooms ever become pests in your aquarium?

  • Mushrooms would never be pests even if they kept replicating.

    Votes: 21 17.6%
  • Mushrooms have not become a pest for me.

    Votes: 50 42.0%
  • Mushroom have become overgrown, but not to the point of becoming pests.

    Votes: 16 13.4%
  • Mushrooms have become pests in my aquarium.

    Votes: 26 21.8%
  • Other.

    Votes: 6 5.0%

New Posts

Back
Top