Anyone have HR nitrite checker

[Randy Holmes-Farley Verified Community Expert]

If nitrite is really 20 ppm, then while I do not know, that value may be high enough to slow the conversion of ammonia.

If true, a couple of water changes followed by a small (back to 2 ppm) ammonia addition could be a good plan.

Or you can just wait and monitor ammonia for a few days and see if it is falling.

I would not add fish now, even after water changes.

 

[2020 Worst Year]

If nitrite is really 20 ppm, then while I do not know, that value may be high enough to slow the conversion of ammonia.

If true, a couple of water changes followed by a small (back to 2 ppm) ammonia addition could be a good plan.

Or you can just wait and monitor ammonia for a few days and see if it is falling.

I would not add fish now, even after water changes.

yea i don't plan too i will test ammonia again in 2 days and see if it has moved any

 

[2020 Worst Year]

Actually going to do x2 50% water changes

 

[2020 Worst Year]

If nitrite is really 20 ppm, then while I do not know, that value may be high enough to slow the conversion of ammonia.

If true, a couple of water changes followed by a small (back to 2 ppm) ammonia addition could be a good plan.

Or you can just wait and monitor ammonia for a few days and see if it is falling.

I would not add fish now, even after water changes.

so how much dr tims ammonium chloride should i add if 4 drops per gallon is a crazy amount

 

[2020 Worst Year]

1 drop per gallon?

 

[Randy Holmes-Farley Verified Community Expert]

1 drop per gallon?

While I have seen reports of issues with Dr Tims ammonia, I cannot be sure what is the cause of it (change in formulation and not directions accompanying it, inaccurate manufacture, inaccurate testing).

I would suggest reading the Dr Tims directions in detail, which does discuss what to do if nitrite is very high (#8)
https://www.drtimsaquatics.com/wp-c...ms-Fishless-Cycling-Recipe-and-Guide-0920.pdf

 

[2020 Worst Year]

so i must of dosed about 10ppm ammonia

1ppm ammonia = 2.7 nitrite
8 x 2.7 = 21.6
2.19 ammonia still in the tank

doing 50% water change soon should bring ammonia to 1.08 and nitrite to 11

if that 1.08 nitrite is gone by 2morrow night am i safe to add fish? or shall i let nitrite convert

 

[Randy Holmes-Farley Verified Community Expert]

so i must of dosed about 10ppm ammonia

1ppm ammonia = 2.7 nitrite
8 x 2.7 = 21.6
2.19 ammonia still in the tank

doing 50% water change soon should bring ammonia to 1.08 and nitrite to 11

if that 1.08 nitrite is gone by 2morrow night am i safe to add fish? or shall i let nitrite convert

I'm more concern with ensuring that ammonia declines rapidly than worrying about the nitrite level.

 

[2020 Worst Year]

I'm more concern with ensuring that ammonia declines rapidly than worrying about the nitrite level.

well it must have done 8ppm from the 3rd got the salt water mixing now

 

[Randy Holmes-Farley Verified Community Expert]

well it must have done 8ppm from the 3rd got the salt water mixing now

I personally would not rely on what it "must" have done, but on what I can measure it to do with ammonia. :)

 

[2020 Worst Year]

I personally would not rely on what it "must" have done, but on what I can measure it to do with ammonia. :)

did 50% water change going to test ammonia in 1 hour to let the fresh water mix with the old then ill test again 2morrow

 

[2020 Worst Year]

After 50% WC
ammonia 1.07
Nitrite 16

shall i do another 50% WC 2morrow?

@Randy Holmes-Farley

 

[Randy Holmes-Farley Verified Community Expert]

After 50% WC
ammonia 1.07
Nitrite 16

shall i do another 50% WC 2morrow?

@Randy Holmes-Farley

Probably. Tim seems to think that nitrite, if accurate, is enough to deter nitrifying bacteria.

 

[2020 Worst Year]

So cycle defo stalled just checked and ammonia is 1.05ppm it has converted 0.02 ammonia in 12 hours

 

[2020 Worst Year]

The hanna ULR nitrite checker (just ordered and arrived today) is blinking 200ppb

the hanna HR nitrite checker is reading 18ppm

think im going to do x2 50% water changes today get nitrite down to 4.5

 

[2020 Worst Year]

Going to do a 90% WC then start the cycle again

 

[Randy Holmes-Farley Verified Community Expert]

Sounds reasonable, if frustrating, I'm sure. :(

 

[2020 Worst Year]

Pretty much 100% WC done apart from the bit at the bottom i could not get going to test nitrite + ammonia in 45 mins then add 10 drops of ammonia chloride see where it takes me

 

[2020 Worst Year]

Thanks for all the help aswell randy appreciate it

 

[2020 Worst Year]

ok so just tested nitrites and still saying they are 5ppm even tho i did like 95% WC