Apex 1link ?

[me & my baby]

What all can the apex 1link control . I don’t need it for wave pumps or DOS but can the 3 ports control any 24v item .

 

[areefer01]

The three 4-pin 1LINK ports are not controllable - they provide Aquabus communications and power to devices like WAVs, DOS, Cor-15, and Trident. They do not have dashboard tiles. This is my understanding. There are two 2-pin DC24 ports that provide 24VDC power. They have tiles associated with them so can be controlled.

I was not sure as I do not own one so went to Neptune's portal to see. If there is something you are thinking you need it for maybe reach out to Neptune and see what they think via their portal/submit ticket. That way you don't buy it and end up not needed it.

I sort of saw it as an extension, space or available port thing.

 

[Reefer Matt]

You can control most 24v devices with them using the bare wire cable and a virtual outlet. I use one as a foghorn and beacon if things go wrong.

 

[me & my baby]

You can control most 24v devices with them using the bare wire cable and a virtual outlet. I use one as a foghorn and beacon if things go wrong.

Buty that is only on the two aux ports correct . The other three have to be either a wave pump , dose or trident correct

 

[Reefer Matt]

Buty that is only on the two aux ports correct . The other three have to be either a wave pump , dose or trident correct

Correct, I just understood what you were asking. Are your 2 pin aux outlets filled up?

 

[me & my baby]

Correct, I just understood what you were asking. Are your 2 pin aux outlets filled up?

no but I had an idea how I wanted to use it. I had it in my head I could control the 3 4 pin ports on and off for just the 24v power.