Apex atk program help

NotFishyFishGuy

There’s a reason I’m broke now...
View Badges
Joined
Jan 12, 2019
Messages
975
Reaction score
1,161
What state or country do you live in
New Jersey
Rating - 0%
0   0   0
EDIT: new problem, pump kicks on for a second then stops...
Problem below has been solved


So can anyone explain to me what the program is saying to do? I used the task configuartion to set it up but it isn’t making sense...

6282F9ED-A646-428E-AF23-285F67C88ACD.png
 
Last edited:
So can anyone explain to me what the program is saying to do? I used the task configuartion to set it up but it isn’t making sense...

6282F9ED-A646-428E-AF23-285F67C88ACD.png
To Answer your question it’s saying it will be off normally, to cut on when ato hi is opened , to be off if ato lo is closed, to not run more than 5 minutes, to wait 10 seconds to cut off after being on, to continue for an extra 4 seconds after triggered off and to only run 1x every 60 minutes
 
To Answer your question it’s saying it will be off normally, to cut on when ato hi is opened , to be off if ato lo is closed, to not run more than 5 minutes, to wait 10 seconds to cut off after being on, to continue for an extra 4 seconds after triggered off and to only run 1x every 60 minutes
Shouldn’t it be on when the low is open and off when it goes past the low?
 
To Answer your question it’s saying it will be off normally, to cut on when ato hi is opened , to be off if ato lo is closed, to not run more than 5 minutes, to wait 10 seconds to cut off after being on, to continue for an extra 4 seconds after triggered off and to only run 1x every 60 minutes
I don’t think I flipped the switches around...I did a test and held the lower switch in the water and th e higher switch out. On the dashboard, the ATO_Low was open and the hig
 
Then after that verify it’s working correctly.
How do i set it to send an alarm if the water is too high? Yesterday there was a malfunction with the entire DOS and the water level was literally the same height as the rim of my tank. If the alarm on the atk had worked then i would have noticed sooner...
 
How do i set it to send an alarm if the water is too high? Yesterday there was a malfunction with the entire DOS and the water level was literally the same height as the rim of my tank. If the alarm on the atk had worked then i would have noticed sooner...
Go to your email alarms and program:
If ATO_Hi closed then on
This should trigger your alarm. I receive a text if one of my alarms trigger
 
Go to your email alarms and program:
If ATO_Hi closed then on
This should trigger your alarm. I receive a text if one of my alarms trigger
Thanks ill try that :)
 
Thanks so much for everything you half already done to help me unfortunately I have another problem... apex keeps sending this don’t know what it means..
B576C373-0E94-4078-A5B3-68BB64C8D5BC.jpeg
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 14.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 11.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 11.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 11.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 22.9%
  • Fish or other livestock

    Votes: 1 2.9%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 2.9%
  • I’m browsing, but don’t have a specific target

    Votes: 4 11.4%
  • I’m not shopping for reef deals this year

    Votes: 4 11.4%
  • Other (Post in the comments)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new