Apex control

  • Thread starter Thread starter JOKER
  • Start date Start date
  • Tagged users Tagged users None

JOKER

2500 Club Member
View Badges
Joined
Feb 5, 2013
Messages
2,917
Reaction score
796
Location
Pulaski
Rating - 0%
0   0   0
Anyone had problems with led plugged into energy bar 8?? I had my drivers plugged into and programmed to be totally off when light was not on. Well noticed lights would blink from time to time. Apparently it was getting bleed through onto outlet 3 because since I moved to 8 it has not happened.
 
yes, its a known problem.. there are several threaeds that discuss this. (google APEX LEDS blinking) i have not ready through them all but saw them when looking up some other things regarding LEDS. APEX forums on their site have lots of info...
 
It's not a problem dedicated to the Apex or EB8. It's a known issues with the driver in general.

I just have mine ramped down to 0% and have them plugged into a regular power strip.


____________________________
Sent from my iThingy using Tapatalk
 
I have mine going to 0 also, just thought would save a few $$$$$ if they were completely off. If you put them on 4 or 8 they don't blink. I guess the relay on 4 and 8 doesn't let them turn on.
 
Hmm when I get a 2nd EB8 I'll try that.


____________________________
Sent from my iThingy using Tapatalk
 
I have mine going to 0 also, just thought would save a few $$$$$ if they were completely off. If you put them on 4 or 8 they don't blink. I guess the relay on 4 and 8 doesn't let them turn on.
Not an expert but # 4 & 8 are different for use of higher Amp draw like MH and such i believe and that has something to do with it not blinking.
Bill
 
Outlets 4 and 8 are relays. The rest are electronic TRIAC outlets. NEVER plug low amp drawing devices into the TRIAC outlets that you want to actually turn on/off. The TRIAC outlets require more amp draw to actually tell the outlet that something is plugged into it. I had a brs dosing pump plugged in one and it never turned off and over dosed alk one time. Only use 4 or 8 relayed outlets for low amp drawing devices.
 
Outlets 4 and 8 are relays. The rest are electronic TRIAC outlets. NEVER plug low amp drawing devices into the TRIAC outlets that you want to actually turn on/off. The TRIAC outlets require more amp draw to actually tell the outlet that something is plugged into it. I had a brs dosing pump plugged in one and it never turned off and over dosed alk one time. Only use 4 or 8 relayed outlets for low amp drawing devices.
Remembered something was different about 4 & 8 just had it reversed, My knowledge base on these matters stinks but no harm done. Thanks for the correct answer Rick/
Bill
 
They say you can fix the problem by adding a suppressor into 1,2,3,5,6, or 7. The triac acts like a plc with no load and will bleed enough voltage to power low amp draw items. That would be good to know from the start. Lesson learned!! No harm.
 
Good to know. I'll be setting up an Apex very soon. I have a couple of DA RKE units and know all about those but never had an Apex until now. Should be interesting :bigsmile:
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 1 12.5%
  • Lighting, pumps, or other major equipment

    Votes: 2 25.0%
  • Controllers, testing, dosing, or automation gear

    Votes: 1 12.5%
  • Dry goods and restocks, like salt, media, or food

    Votes: 1 12.5%
  • Corals! Must...Have...CORALS!!!

    Votes: 1 12.5%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 12.5%
  • I’m browsing, but don’t have a specific target

    Votes: 0 0.0%
  • I’m not shopping for reef deals this year

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 1 12.5%
Back
Top
Home
Post thread…
Market
What's new