Apex Dos DDR.....Switch open or closed?

  • Thread starter Thread starter clhardy5
  • Start date Start date
  • Tagged users Tagged users None

clhardy5

Active Member
View Badges
Joined
Jun 20, 2020
Messages
403
Reaction score
230
Location
Aurora, CO
Rating - 0%
0   0   0
I've been running my Apex dos with DDR for several months now - without a hiccup. Usually on the dashboard the DDRALK and DDRCalc switches are both closed - I've never seen them open. However today, the DDRALK switch says 'open' and DDRCALC is still closed. What do these 'switches' control....and what should they be on? Open or closed?
 
Moved to the controller forum! Maybe this will help get you an answer!
 
I've been running my Apex dos with DDR for several months now - without a hiccup. Usually on the dashboard the DDRALK and DDRCalc switches are both closed - I've never seen them open. However today, the DDRALK switch says 'open' and DDRCALC is still closed. What do these 'switches' control....and what should they be on? Open or closed?

The DDR's optical sensors report CLOSED when they are covered with liquid, and OPEN when the liquid level is below the sensor. This is the same for Neptune's optical sensors used to measure water levels in a sump or barrel.

You can use the status of these switches in your Apex programming to send you an alert when the DDR is low, or even to turn off the DOS until you have a chance to refill the DDR.

Example to send an alarm:
[EmailAlm]
Set OFF
If DDRALK OPEN Then ON

Example to stop the DOS:
(add this to the Advanced tab on your DOS)
If DDRALK OPEN Then OFF

DDR (1).png
 
Last edited:
The DDR's optical sensors report CLOSED when they are covered with liquid, and OPEN when the liquid level is below the sensor. This is the same for Neptune's optical sensors used to measure water levels in a sump or barrel.

You can use the status of these switches in your Apex programming to send you an alert when the DDR is low, or even to turn off the DOS until you have a chance to refill the DDR.

Example to send an alarm:
[EmailAlm]
Set OFF
If DDRALK OPEN Then ON

Example to stop the DOS:
(add this to the Advanced tab on your DOS)
If DDRALK OPEN Then OFF

DDR (1).png
Thank you so much!
 
one of my sensors has started reporting open nonstop and its covered with liquid any opinions?
 

TOP 10 Trending Threads

IF ONE SYSTEM FAILED WHILE YOU WERE AWAY, WHICH WOULD WORRY YOU MOST?

  • Power or backup power

    Votes: 8 25.0%
  • Heating or cooling

    Votes: 1 3.1%
  • Auto top-off

    Votes: 3 9.4%
  • Return pump or water circulation

    Votes: 3 9.4%
  • Dosing or automated testing

    Votes: 0 0.0%
  • Plumbing, overflow, or leaks

    Votes: 5 15.6%
  • Tank sitter or remote monitoring

    Votes: 1 3.1%
  • Electrical failure of some sort

    Votes: 0 0.0%
  • Seam or structure failure

    Votes: 8 25.0%
  • Something else (tell us in the comments)

    Votes: 3 9.4%
Back
Top
Home
Post thread…
Market
What's new