Aquarium Set Up

ShellyTheReefer

Community Member
View Badges
Joined
May 2, 2025
Messages
42
Reaction score
29
Location
Leeds
What state or country do you live in
United Kingdom
Rating - 0%
0   0   0
Hi all,

So I've purchased the following;
Fluval Sea 52L Aquarium Kit
Fluval M Premium Heater 50W
Fluval Sea PS2 Mini Protein Skimmer
CarbiSea Arag-Alive Special Grade Live Reef Sand
5kg Dried Reef Rock Mixed Pack
Dr Tims One and Only Nitrifying Bacteria Reef 2oz

Now, due to space constraints, I planned to buy ready-made saltwater from my local Maidenhead Aquatics rather than getting a RODI set up, plus with it being such a small tank, it works out cheaper (my MA only charges 25p a litre and I already have the containers).

The issue is, I have purchased the linked dried reef rock, and it says on the care sheet this;

"First and foremost, your dried reef rock must be soaked to remove any dust buildup or dead organics. Your rock has been pre-washed but will still require this stage.

We strongly recommend you do this in fresh RO water, you can also use a weak white vinegar solution at this stage."

My initial plan was to set up the rocks, sand, add water, wait for the water to come to temp and then the next day add the Dr Tims and a pair of clownfish, however due to me not having access to RO water I am not sure how to soak these rocks - do they need soaking for a new aquarium? The Dr Tims is enough to dose the tank twice over, would that be able to combat anything the rock kicks out?

Can I just soak the dust off with dechlorinated tap water and then add it to the tank?
I know adding this rock to an existing aquarium will cause it to cycle, but by using the bacteria + premade water I will have a headstart on cycling anyway?

Sorry if I'm rambling, it's been 10+ years since I last kept marines, so my brain is very tired from trying to remember it all/catch up on research.

Note: I do plan to buy and add some live rock as well, these are just my foundation pieces.

1746195249344.png
 
Last edited:
Welcome to Reef2Reef!

Just a couple thoughts that hopefully will help. First, I would fully nitrogen cycle the tank before adding your Clownfish. Don't just add the Dr. Tim's bacteria and immediately add the fish, wait for the tank to fully cycle (about three weeks, if using Dr. Tim's).

In addition to the Dr. Tim's bacteria, you need a source of ammonia to kick start the cycle. This is typically done with Dr. Tim's ammonium chloride (<my preferred method), a piece of shrimp from the seafood market, or by adding fish food (even when you have no fish (ghost feeding)).

This video may help, it even discusses a "fish in" cycle like you're describing above, which is not a popular method anymore:


You can purchase saltwater from your Local Fish Store (LFS), but you will also need purified freshwater to replace freshwater that evaporates out of the tank. Your LFS will likely also sell this water, or you can buy distilled water from any grocery store or pharmacy and use that to replace evaporated freshwater, or even to make your own saltwater.

If you do buy your saltwater premade from your shop, you'll still need a good refractometer to double check the salinity of the water you purchase. Don't just trust that this water will be fine without checking.

As for the rocks, most dry rocks don't really need curing first, but many do indeed cure their dry rock. Using RO water or a mild acid is one method, but I actually prefer to use bleach to cure dry rock; it's faster, easier and more effective, in my opinion. This video may help:
https://www.bulkreefsupply.com/cont...ock-for-a-saltwater-reef-tank-brstv-reef-faqs
You could also just setup your tank and give it time (several weeks) for the rock to cure naturally with the bacteria you're adding.

If you add real, high quality live rock, then your total cycle time will be cut down a lot. By how much depends on how much live rock you add, and how much organic material is in/on your dry rocks.

I hope that helps, good luck!
 
Hi!
That's the video I watched, and it mentions using Dr Tim's/FritzZyme Turbo 900 then adding a fish instead of ammonia which is where I got the idea from. Maybe I will rewatch, but I am not against adding ammonia instead :)

I intend to go to my LFS for RO water for top-ups, and have ordered a refractometer - this is also where I plan to buy, probably another 3-5kg of live rock, of the highest quality I can afford.

Would it be safe to assume that with the sand, dry rock, ammonia + Dr Tims that I could add the live rock right away?

As for the bleach curing, can it be done with dechlorinated tap water (API Aqua Essential) + thin bleach?

It's been over 10+ years since I did my last tank, and I had a lot of help from my dad who has kept aquariums for many years, but I now live a fair distance away so its not like we can go to the fish shops together anymore lol.
 
Hi!
That's the video I watched, and it mentions using Dr Tim's/FritzZyme Turbo 900 then adding a fish instead of ammonia which is where I got the idea from. Maybe I will rewatch, but I am not against adding ammonia instead :)
The Fritz product specifically works much faster than the Dr. Tim's, and many people who use the Fritz bacteria do add fish right away. I would personally use the bottled ammonium chloride and have the tank fully cycled before getting the fish.

If you're going to add the live rock, your tank will more or less instantly cycle, so in that case you may also be alright to add the fish right away. Live rock plus the Fritz product, and you really should be alright.

With that in mind, I'm not sure if I'd bother with the curing of the dry rock. Any organics on the rock will be processed naturally. Unless you see visible organic material on the rocks, it probably just needs a good rinse.

If you do decided to bleach cure the dry rock, you can use regular, untreated tap water and regular house hold bleach like Chlorox. Bleach is more or less chlorine in a bottle, so there's no need to dechlor the tap water. Just make sure it's plain bleach without any additional perfumes or dyes, and not the stuff labeled as "splash free" or similar. When done, just rise the rock well in fresh water and allow the rock to dry out fully, ideally in the sun. Once dry, any remaining bleach is neutralized, it's also degraded by sunlight.

Do you have a test kit to watch for an ammonia spike? If you do see ammonia going over about 0.5 ppm, you can do a water change to try to lower that. Don't rely on products like Seachem's Prime, those products don't bond or remove ammonia in marine tanks, despite what the bottle says.
 
The Fritz product specifically works much faster than the Dr. Tim's, and many people who use the Fritz bacteria do add fish right away. I would personally use the bottled ammonium chloride and have the tank fully cycled before getting the fish.

If you're going to add the live rock, your tank will more or less instantly cycle, so in that case you may also be alright to add the fish right away. Live rock plus the Fritz product, and you really should be alright.

With that in mind, I'm not sure if I'd bother with the curing of the dry rock. Any organics on the rock will be processed naturally. Unless you see visible organic material on the rocks, it probably just needs a good rinse.

If you do decided to bleach cure the dry rock, you can use regular, untreated tap water and regular house hold bleach like Chlorox. Bleach is more or less chlorine in a bottle, so there's no need to dechlor the tap water. Just make sure it's plain bleach without any additional perfumes or dyes, and not the stuff labeled as "splash free" or similar. When done, just rise the rock well in fresh water and allow the rock to dry out fully, ideally in the sun. Once dry, any remaining bleach is neutralized, it's also degraded by sunlight.

Do you have a test kit to watch for an ammonia spike? If you do see ammonia going over about 0.5 ppm, you can do a water change to try to lower that. Don't rely on products like Seachem's Prime, those products don't bond or remove ammonia in marine tanks, despite what the bottle says.
Thank you so much, this is super helpful.
My plan currently is to get the arag alive sand, water, dry rock (which will be going for a short bleach bath with some thin bleach from my local supermarket as I can see shells and other debris I want to make sure is really clean before it goes in) & live rock (probably 3-5kg), toss in the Dr Tims One & Only (as extra bacteria can't hurt right?) and test it for a few days. If it shows no ammonia, no nitrites and some nitrates, I believe it'd be good to go?

In regards to testing, I ordered the API Saltwater Master kit, but on further browsing, there seems to be some discourse as to whether or not they're accurate, so I am open to recommendations, as it's not too late to cancel the order lol.

I do plan to keep 25L of the pre-mixed seawater on hand specifically for water changes, how often would you recommend? I was thinking once a week.
 
Hi all,

So I've purchased the following;
Fluval Sea 52L Aquarium Kit
Fluval M Premium Heater 50W
Fluval Sea PS2 Mini Protein Skimmer
CarbiSea Arag-Alive Special Grade Live Reef Sand
5kg Dried Reef Rock Mixed Pack
Dr Tims One and Only Nitrifying Bacteria Reef 2oz

Now, due to space constraints, I planned to buy ready-made saltwater from my local Maidenhead Aquatics rather than getting a RODI set up, plus with it being such a small tank, it works out cheaper (my MA only charges 25p a litre and I already have the containers).

The issue is, I have purchased the linked dried reef rock, and it says on the care sheet this;

"First and foremost, your dried reef rock must be soaked to remove any dust buildup or dead organics. Your rock has been pre-washed but will still require this stage.

We strongly recommend you do this in fresh RO water, you can also use a weak white vinegar solution at this stage."

My initial plan was to set up the rocks, sand, add water, wait for the water to come to temp and then the next day add the Dr Tims and a pair of clownfish, however due to me not having access to RO water I am not sure how to soak these rocks - do they need soaking for a new aquarium? The Dr Tims is enough to dose the tank twice over, would that be able to combat anything the rock kicks out?

Can I just soak the dust off with dechlorinated tap water and then add it to the tank?
I know adding this rock to an existing aquarium will cause it to cycle, but by using the bacteria + premade water I will have a headstart on cycling anyway?

Sorry if I'm rambling, it's been 10+ years since I last kept marines, so my brain is very tired from trying to remember it all/catch up on research.

Note: I do plan to buy and add some live rock as well, these are just my foundation pieces.

1746195249344.png
You could also buy Tampa Bay live sand, which will help cycle the system even faster, cause it has all the bacteria that you need that you’ll be trying to grow. I’d look into it, it comes in a bag. It’s even actually wet from the bay that they harvest it from.
 
Thank you so much, this is super helpful.
My plan currently is to get the arag alive sand, water, dry rock (which will be going for a short bleach bath with some thin bleach from my local supermarket as I can see shells and other debris I want to make sure is really clean before it goes in) & live rock (probably 3-5kg), toss in the Dr Tims One & Only (as extra bacteria can't hurt right?) and test it for a few days. If it shows no ammonia, no nitrites and some nitrates, I believe it'd be good to go?

In regards to testing, I ordered the API Saltwater Master kit, but on further browsing, there seems to be some discourse as to whether or not they're accurate, so I am open to recommendations, as it's not too late to cancel the order lol.

I do plan to keep 25L of the pre-mixed seawater on hand specifically for water changes, how often would you recommend? I was thinking once a week.
If you’re planning on having corals, you’ll wanna get the Red Sea foundation pro test kit. The API test kit will get you through the cycle, but it doesn’t contain test kits for calcium, magnesium or alkalinity. And you’ll probably need to grab a phosphate a nitrate kit once you’ve started to add Fish.
 
You could also buy Tampa Bay live sand, which will help cycle the system even faster, cause it has all the bacteria that you need that you’ll be trying to grow. I’d look into it, it comes in a bag. It’s even actually wet from the bay that they harvest it from.
Hi!
I'm in the UK so that doesn't seem accessible to me, I believe the Arag Alive Carribean has lots of bacteria to help kickstart things as well :)
The description says;
"CaribSea Arag-Alive Sp. Grade 1-2mm: Arag-Alive! Aragonite Reef Sand with Live Stabilized Marine Bacteria!"
 
If you’re planning on having corals, you’ll wanna get the Red Sea foundation pro test kit. The API test kit will get you through the cycle, but it doesn’t contain test kits for calcium, magnesium or alkalinity. And you’ll probably need to grab a phosphate a nitrate kit once you’ve started to add Fish.
Thank you for this, corals will be added eventually but right now getting through the cycle is my goal, so knowing about the Red Sea kit really helps.
 
Hi!
I'm in the UK so that doesn't seem accessible to me, I believe the Arag Alive Carribean has lots of bacteria to help kickstart things as well :)
The description says;
"CaribSea Arag-Alive Sp. Grade 1-2mm: Arag-Alive! Aragonite Reef Sand with Live Stabilized Marine Bacteria!"
What the heck come to Florida take four or five days vacation enjoy the beach grab a bag of Tampa Bay live sand. Throw it into your carry-on and take it on home. lol 🤣🤣🤣🤣🤣🤣
 
Thank you so much, this is super helpful.
My plan currently is to get the arag alive sand, water, dry rock (which will be going for a short bleach bath with some thin bleach from my local supermarket as I can see shells and other debris I want to make sure is really clean before it goes in) & live rock (probably 3-5kg), toss in the Dr Tims One & Only (as extra bacteria can't hurt right?) and test it for a few days. If it shows no ammonia, no nitrites and some nitrates, I believe it'd be good to go?

In regards to testing, I ordered the API Saltwater Master kit, but on further browsing, there seems to be some discourse as to whether or not they're accurate, so I am open to recommendations, as it's not too late to cancel the order lol.

I do plan to keep 25L of the pre-mixed seawater on hand specifically for water changes, how often would you recommend? I was thinking once a week.
I think that's a solid plan :)

The API test kits don't get a lot of love here on R2R, but they are not horrible. They tend to, for one thing, show like 0.25 ppm for ammonia when the real level may be near zero. Some people have unnecessarily cycled their tank for months on end because "the ammonia never went down to zero". So keep that in mind as you're testing for ammonia.

Also know that when nitrites are present, they will show up in the nitrate test, making it appear like you have much higher nitrates than you really do. That's true of most test kits, not just API.

Also know that nitrite is not toxic in marine aquariums (unlike in freshwater), and I wouldn't bother testing for it. Just be aware that it can influence your nitrate reading.

Most here suggest the Salifert brand test kits. These are inexpensive, accurate, and most believe much easier to read (no comparing colors). The Hanna Checkers are nice for most parameters, but they are a little pricy, and totally unnecessary. I do see them used frequently in the marketplace here on R2R.

Here's an example of the Salifert test kits:
https://www.bulkreefsupply.com/sali...7fPPjrrAmWX5K_iBahmrQXDymocy6qScaAr1nEALw_wcB
 
Oh, and the shells you see are fine, they are calcium based, and the bleaching won't remove them. But that's fine, they won't breakdown and release ammonia like organics will :)
 
Oh, and the shells you see are fine, they are calcium based, and the bleaching won't remove them. But that's fine, they won't breakdown and release ammonia like organics will :)
I honestly can't thank you enough, you've soothed many of my initial set-up worries. Fingers crossed I get an easy cycle and can get my first fishies when it's safe.

I read on another post here that testing for magnesium is pointless. Is that true? I like the look of the Saliferts for price & from what I've seen on other threads, would I only need KH & Calcium?

Unfortunately, I'm stuck with the API tests as they dispatched as soon as I replied here! I will definitely take the ammonia reading with a pinch of salt ;)
 
I honestly can't thank you enough, you've soothed many of my initial set-up worries. Fingers crossed I get an easy cycle and can get my first fishies when it's safe.

I read on another post here that testing for magnesium is pointless. Is that true? I like the look of the Saliferts for price & from what I've seen on other threads, would I only need KH & Calcium?

Unfortunately, I'm stuck with the API tests as they dispatched as soon as I replied here! I will definitely take the ammonia reading with a pinch of salt ;)
No problem, I am happy to try and help!

I think you've got a solid plan going.

Magnesium is something that some reefers do not test. Partly, because many of the available tests for Mag can be frustrating to get right and get a good result.

If you're just starting out, and likely going to try some of the easier soft corals, then the parameters of Alk, Calc, and Mag are all less important as these corals are not really building a calcium carbonate skeleton like their stony cousins. Focus on salinity, make sure that's stable. I believe salinity is the most important thing because when it fluctuates every other parameter fluctuates too.

If you don't have an Auto Top Off unit, I would recommend one. Especially on smaller tanks, a little bit of evap can be a big salinity change.
 
No problem, I am happy to try and help!

I think you've got a solid plan going.

Magnesium is something that some reefers do not test.

If you're just starting out, and likely going to try some of the easier soft corals, then the parameters of Alk, Calc, and Mag are all less important as these corals are not really building a calcium carbonate skeleton. Focus on salinity, make sure that's stable. I believe salinity is the most important thing because when it fluctuates every other parameter fluctuates too.

If you don't have an Auto Top Off unit, I would recommend one. Especially on smaller tanks, a little bit of evap can be a big salinity change.
I'm definitely in no rush for a lot of the fancy corals ahah, my priority to start (once the water is good) is a cleanup crew (which I know I'll have to feed whilst the tank establishes/gets to the ugly stage), clowns and an anemone. If I can keep them alive, then I'll look at some nice basic coral frags, I quite like a lot of the Softies - Mushrooms, Zoas and such! I would also like to add some macroalgae as well to complete the nitrogen cycle, but I need to do more research on what would be compatible.

Salinity is what did my dad's tank in, so it's something I will be on/checking regularly. I plan to have 25l of RO water handy for topping off, and then nipping to my LFS for more when I get low.

Is there an Auto Top Off unit you recommend for the evo 52l? I've not heard of them until now, so I don't want to get the wrong thing :)
 
Many would suggest to hold off on the anemone until the tank is a little more mature, typically like around 6 months or so. Using the real live rock will go a long way to speeding up this process, so you're milage may vary here. But many seem to say that anemones often don't do well in brand new tanks.

However, Clownfish are goofy, and are know to host in a variety of soft corals and other things, so you can still have that Clownfish/anemone thing going on.

For an ATO, there is one that everyone recommends, especially on nano tanks. I *think* it's this AutoAqua unit here, but definitely double check that before ordering. A lot of people have your tank, I'm sure someone can tell you what works well for sure. Other choices include the Tunze Osmolators and Hyger makes a decent one I believe.

https://aquacave.com/autoaqua-smart...d5e1Ukt3P7SaJgvwEAUbWAIxTBkcFs_0urM2URo&gQT=1
 
Thank you again!

We did have clowns that bonded to a large leather coral, so maybe I will go down that route so they have a home for the meantime! Are there any signs to watch for yo know if your tank is ready for an anemone?

Thank you, I'll see what upgrades people have made to their evos and hopefully someone will have used a good one with some success, for now I am around 24/7 so will keep an eye on it manually while its just bare bones.
 
Thank you again!

We did have clowns that bonded to a large leather coral, so maybe I will go down that route so they have a home for the meantime! Are there any signs to watch for yo know if your tank is ready for an anemone?

Thank you, I'll see what upgrades people have made to their evos and hopefully someone will have used a good one with some success, for now I am around 24/7 so will keep an eye on it manually while its just bare bones.
There's a member's tank section here, I'm sure you'll see other people's builds with that tank.

I honestly don't know for sure, it's been quite a long time since I've tried to keep an anemone. I have recently kept the small rock flower anemones, they are pretty hardy and would be great in your tank, though I don't believe they host Clownfish. Other anemones I haven't tried in years, so maybe another member would have more guidance about when to add them.
 
Well, both my sand and refractometer were missing from my order, so everything is on hold for a minute while the supplier figures out what happened (there isn't even a packing sheet for me to cross-reference, but the box my tank, etc., came in is torn down a whole corner). I figured I may as well bleach the rocks while I wait.

I did, however, call around and found out that a couple of my LFS have some live rock that's suitable for my tank, but I'm stuck now until my sand arrives :(
 
Well, both my sand and refractometer were missing from my order, so everything is on hold for a minute while the supplier figures out what happened (there isn't even a packing sheet for me to cross-reference, but the box my tank, etc., came in is torn down a whole corner). I figured I may as well bleach the rocks while I wait.

I did, however, call around and found out that a couple of my LFS have some live rock that's suitable for my tank, but I'm stuck now until my sand arrives :(
That's a bummer, but sounds like your making the best of the situation by doing other things. Best thing you can be in this hobby is patient :)
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 18 29.5%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.3%
  • I’d rather get a gift card and pick it myself

    Votes: 23 37.7%
  • I’d prefer gear or supplies instead

    Votes: 1 1.6%
  • Please don’t surprise me with livestock

    Votes: 17 27.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new