Best ATO?

[Sophie"s mom]

Good morning all, I am in the mayor an ato, and woowhich one is preferred by folks here. My tank is a 90 gallon. Thanks in advance for any and all help

 

[Nick Steele]

I love my tunze 3155! It’s on a 20g and is total overkill but it hasn’t failed me yet going on 4 years now

 

[tzabor10]

Tunze is the best. But duetto is a reliable choice

 

[twentyleagues]

Tunze is the best. I have used the 3155 for years and it works great. I currently have a osmolator 3 on my larger tank and has been flawless since I started this tank in january. One thing to note is the sensor on the 3155 needs to be cleaned regularly I do it during maintenance just a quick wiping off of the sensor or brush with a soft tooth brush is sufficient. I think if you dont the "scum" or salt builds up on it and causes it to see the water level as higher then what it is. Another way that seems to help if it isnt coming on properly is to direct some flow at it. All my 3155s have had this happen.

In the short time I have been using the 3 it has been set and forget. The 3 is extremely accurate if I remove 50ml of water to thaw frozen food it will read that drop and add water. My return chamber where its at holds 7 gallons. It takes more to trip the high level sensor at a guess I'd say 1/4 gallon, its not a lot.

 

[ryanjohn1]

Tunze is the most popular

 

[Sophie"s mom]

I love my tunze 3155! It’s on a 20g and is total overkill but it hasn’t failed me yet going on 4 years now

Yeah that is one I am looking at for sure.

 

[Nick Steele]

Tunze is the best. I have used the 3155 for years and it works great. I currently have a osmolator 3 on my larger tank and has been flawless since I started this tank in january. One thing to note is the sensor on the 3155 needs to be cleaned regularly I do it during maintenance just a quick wiping off of the sensor or brush with a soft tooth brush is sufficient. I think if you dont the "scum" or salt builds up on it and causes it to see the water level as higher then what it is. Another way that seems to help if it isnt coming on properly is to direct some flow at it. All my 3155s have had this happen.

Interesting! I’ve had my 3155 for 4 years and cleaned it twice during maintenance and once due to moving. No issue at all has been set and forget for me.

 

[esquare]

I have used Tunze for many years and had good success but you still have to maintain it. Cleaning the sensor regularly is the most important thing to do. Ironically, my coral qt and fish qt tanks have different Tunzes on them and both reservoirs were empty this morning.

If you have a controller, you might be better off staying within that ecosystem and use their ATO. I use the Neptune ATK for my display and like how errors/problems are incorporated in my Apex alarms.

 

[Pistondog]

Yeah that is one I am looking at for sure.

Check out the osmolator 3 before purchase.
I have both the older tunze models and are happy with them, but the os 3 looks worth a try.

 

[exnisstech]

I wish they still made the jbj units with the mechanical float switches. I have one that's been running for almost 8 years. I wrapped the in sump level sensor in a ladies stocking when I placed it 6 years ago and I have never had to clean it. I always found it a bit funny that so many people prefer the optical switches yet tunze uses a mechanical float switch as the failsafe :thinking-face: I have tunze 5017 and a kamoer ato one 2 also and they both work fine but I would have nothing but jbj units if they still made them. I just prefer the mechanical float switches vs the optical ones. But I also prefer a V8 with a 4 speed manual trans so I adapt.

 

[Pistondog]

I wish they still made the jbj units with the mechanical float switches. I have one that's been running for almost 8 years. I wrapped the in sump level sensor in a ladies stocking when I placed it 6 years ago and I have never had to clean it. I always found it a bit funny that so many people prefer the optical switches yet tunze uses a mechanical float switch as the failsafe :thinking-face: I have tunze 5017 and a kamoer ato one 2 also and they both work fine but I would have nothing but jbj units if they still made them. I just prefer the mechanical float switches vs the optical ones. But I also prefer a V8 with a 4 speed manual trans so I adapt.

Even the float switches can fail. The new osmolator 3 uses a thermal switch as the safety.

 

[TheReefPA]

Another vote for the tunze osmolator 3. Set and forget.

 

[exnisstech]

Even the float switches can fail. The new osmolator 3 uses a thermal switch as the safety.

Sure they can and will. I spent my career fixing broken and worn out things. I'm of the mindset everything will fail at some point, it's just a matter of when. IME mechanical switches do not fail because they get a little dirty like some of the optical sensors that's my reason for preferring them. No optical sensor is going to survive 6 years like this and still function ;)

 

[Uncle99]

Good morning all, I am in the mayor an ato, and woowhich one is preferred by folks here. My tank is a 90 gallon. Thanks in advance for any and all help

This $90 buck one off Amazon running years without fail. Plugged into a multi timer Amazon $20 which only allows power for 1 minute every hour. That frequency matches the evaporation rate so ensures a fail on, would not overfill.

 

[ca1ore]

I’ve no idea whether Tunze is the ‘best’ or not …. It’s kind of a silly claim if you think about it. It may well be the most popular. Don’t know that either. There are a bunch of good options. I have used the avast kit for many years - I personally think that a pressure switch is less likely to go wonky. I have also used the inexpensive set from autotopoff.

 

[Reeferbadness]

I had 2 x Tunz (2 tanks) but got a free Red Sea ATO with a replacement tank (long story). The Red Sea is far better in my opinion, you can see through the app the top off log, level of water, volume replaced and how much is left in your reservoir. Very helpful when traveling. Also, i had a few issues with the Tunz's sensor - if not cleaned once in a while it would fail. I have since replaced the 2nd Tunz with a Red Sea ATO.