Brand New 8 gallon bio cube

I'd already considered having a 3D printed collar if we went that route. Even a redneck block of wood with a hole saw.
Just use a PVC pipe standoff and fasten the return to the stand. If you are using hard pipe I wouldn't worry too much about the return coming out of the tank.

You will do fine with the plumbing. We got your back too.
 
Just use a PVC pipe standoff and fasten the return to the stand. If you are using hard pipe I wouldn't worry too much about the return coming out of the tank.

You will do fine with the plumbing. We got your back too.

And +1 on this, a standoff works very well with a couple unions into the mix. You could even mount a union flush with the top of the tank and rotate your return nozzle horizontally in a flash. Just make sure it's off when you do it though lol
 
So I decided to spy on my tank after the lights went out and saw I have at least a thousand (not exaggerated) of these in my tank. They look like teeny tiny Mexican turbos. I was under the impression Mexican turbos wouldn't breed in captivity. But they're certainly not ceriths, stomatella, bumblebee snails or nassarius and those are the only species I have. Thoughts?
First picture for size reference and the second is GREATLY enlarged.
0818190055_Film1.jpg
0818190044a_Film1-02.jpeg
 
So I decided to spy on my tank after the lights went out and saw I have at least a thousand (not exaggerated) of these in my tank. They look like teeny tiny Mexican turbos. I was under the impression Mexican turbos wouldn't breed in captivity. But they're certainly not ceriths, stomatella, bumblebee snails or nassarius and those are the only species I have. Thoughts?
First picture for size reference and the second is GREATLY enlarged.
0818190055_Film1.jpg
0818190044a_Film1-02.jpeg

Have a look at colonista (spelling) snails. ;)
 
"Should I install multiple return lines?
This is generally not necessary, and I will show you why.

If you inject a visible additive like an Alkalinity solution down at the intake of the return pump, you can observe just how quickly water mixes in a tank.

With adequate powerhead flow, all that water will mix together into a uniform haze in a few seconds with even low amounts of flow. This happens whether the the return is one outlet or many different ones. This is a good indication of why you need not worry about multiple outlets or placing an outlet as far away from the overflow as possible. Consider the following:

  • Splitting the return can unnecessarily add to friction loss of the return system, lessening the output of the pump. In order to compensate for this, you would need multiple outlets – which are unsightly and provide no benefits
  • Unless you have a 300+ gallon system or an 8′ long tank, there is no need to use more than a single return outlet
  • A single return line is inconspicuous and easy to hide out of sight"
source: GMACreef

@Katrina71
See i'm just being obtuse and unnecessary by doing all the dual return quad output crap in my tank...I'm like that ya know! :cool:
Meh. I disagree with that article. If you have internal overflows I find it important because you can bend the closest loc-line return to eliminate dead spots which are very common in tanks with big megaflows. Also some areas have minimal or no surface agitation, bending one loc-line to the water level instantly fixes that issue as well. More gas exchange, evaporation, things I want.
I do agree that it reduces the maximum flow performance on pumps. I would of got a bigger pump for my 90 if I knew what I know now.
 
Meh. I disagree with that article. If you have internal overflows I find it important because you can bend the closest loc-line return to eliminate dead spots which are very common in tanks with big megaflows. Also some areas have minimal or no surface agitation, bending one loc-line to the water level instantly fixes that issue as well. More gas exchange, evaporation, things I want.
I do agree that it reduces the maximum flow performance on pumps. I would of got a bigger pump for my 90 if I knew what I know now.
That can be fixed with powerheads though, no need for an extra return. Either way the flow is needed just depends how ya wanna incorporate it into the tank.
 
I am incorporating (someday) added random flow using my two returns. The returns are single returns for each of the two pumps. The SeaSwirls will provide oscillating random flow at each point of return. Each SeaSwirl will be outfitted with Random Flow Generator nozzles. There will also be two MP-40s on board. This should be more like a washing machine, if everything runs wide open (which I am not planning).

Top1.jpg


Double Pumper2.jpg
 
Last edited:
I am incorporating (someday) added random flow using my two returns. The returns are single returns for each of the two pumps. The SeaSwirls will provide oscillating random flow at each point of return. Each SeaSwirl will be outfitted with Random Flow Generator nozzles. There will also be two MP-40s on board. This should be more like a washing machine, if everything runs wide open (which I am not planning).

Top1.jpg


Double Pumper2.jpg

Pretty ;Drool

I'm still not sure what pump to go with on my build for the closed loop, I wanted to stay away from the Vectras but aside from the Sicce SDC there aren't any pumps out there with random flow preset in the pump controllers.
 
Pretty ;Drool

I'm still not sure what pump to go with on my build for the closed loop, I wanted to stay away from the Vectras but aside from the Sicce SDC there aren't any pumps out there with random flow preset in the pump controllers.
I am afraid mine will be frozen up by the time I get to use them. They are already a couple years out of warranty. :)
 
I am afraid mine will be frozen up by the time I get to use them. They are already a couple years out of warranty. :)


Lol that's not good. You know it blows my mind that these $1-2,000+ pumps don't have any preset flow patterns and they need a separate controller to make flow patterns...
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 13.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 13.3%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 13.3%
  • Dry goods and restocks, like salt, media, or food

    Votes: 3 10.0%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 26.7%
  • Fish or other livestock

    Votes: 1 3.3%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.3%
  • I’m browsing, but don’t have a specific target

    Votes: 4 13.3%
  • I’m not shopping for reef deals this year

    Votes: 1 3.3%
  • Other (Post in the comments)

    Votes: 1 3.3%

New Posts

Back
Top
Home
Post thread…
Market
What's new