Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It all depends on the difference in solution concentrations between the brs & the A.F. products.have been dosing BRS 2 part for alk, cal and mag but just ordered Aquaforest 123. Has anyone made the same switch, if so will i need to dose more or less of each portion? What is the ratio?
As you know your previous dosing AND also the Ca/Alk/Mg containing parts of both recipes are known, the dosing should be clear:
- Component 1+: you need 2,04 times as much (204% of the dosing amount of BRS 2 part)
- Component 2+: you need 2,03 times as much (203% of the dosing amount of BRS 2 part)
(calculations done with AquaCalculators 2-part calculation model)
Component 3+ is different. "controlling" your Mg-value isn't possible/Thought with 3+. Instead AF recommends to dose 50ml per 100L watervolume each day(3+ contains traces and also a certain amount of Mg)
BRS is twice as potent, so you will need to dose twice as much of the Aquaforest 123. :)
This is one reason i use the mix your own components 1 2 3+. I can leave out the mag powder if i need to.Thank you guys, i will start with just under 2 times the daily dose. Currently dosing 25 ml of cal and alk from brs so 45 ml should be a safe place to start while testing daily. I would rather have a slight alk drop then have it raise to high.
Do have one more question, i use Aquaforest reef salt and my mag hovers around 1475-1500 checked with both salifirt and red sea test. Will the 1+2+3 raise that? I currently do not dose any mag as i have been trying to get it to drop to around 1400. I currently have salinity at 1.026 and might consider dropping slowly to 1.025 using slightly lower salinity with water changes to see if that helps correct the high mag. What are your thoughts just let it ride that 1500 line and keep salinity at 1.026 or slowly drop salinity to 1.025 and see if that will lower closer to the 1400 mark. Currently not seeing any negative effects from mag levels.
This is one reason i use the mix your own components 1 2 3+. I can leave out the mag powder if i need to.
I'm sure it won't make too much difference, & you can use the mix your own next time.That’s pretty smart ;) I debated on purchasing everything to mix my own but figured i would buy premixed the first time to see how it did for me, plus get can reuse the jugs in future. You must be using Aquaforest salt and having high mag issues aswell? Did you try the premixed before you started mixing, if so did it raise your mag using the premixed?
I converted from ESV to AF. My biggest issue so far relates to Randy's concentration comment above. When doing my Apex dosing calculations on Reeftronics (https://www.reeftronics.net/), I'm now getting caveats saying that I'm running my dosers for a longer duration of time than they were designed to be run at (I've got a pretty large system). The solution will be to either double the number of BRS 1.1 dosers I have (which would be an interesting backup) or to convert back to ESV and thus run my existing dosers less frequently. I'd appreciate any other solution I might have missed...
Note: My conversion to AF was driven by my annoyance with the difficulty I encountered diluting ESV's bulk concentrates. As fate would have it, I've since learned there is an easier way to handle that dilution issue...
As you know your previous dosing AND also the Ca/Alk/Mg containing parts of both recipes are known, the dosing should be clear:
- Component 1+: you need 2,04 times as much (204% of the dosing amount of BRS 2 part)
- Component 2+: you need 2,03 times as much (203% of the dosing amount of BRS 2 part)
(calculations done with AquaCalculators 2-part calculation model)
Component 3+ is different. "controlling" your Mg-value isn't possible/Thought with 3+. Instead AF recommends to dose 50ml per 100L watervolume each day(3+ contains traces and also a certain amount of Mg)
As you know your previous dosing AND also the Ca/Alk/Mg containing parts of both recipes are known, the dosing should be clear:
- Component 1+: you need 2,04 times as much (204% of the dosing amount of BRS 2 part)
- Component 2+: you need 2,03 times as much (203% of the dosing amount of BRS 2 part)
(calculations done with AquaCalculators 2-part calculation model)
Component 3+ is different. "controlling" your Mg-value isn't possible/Thought with 3+. Instead AF recommends to dose 50ml per 100L watervolume each day(3+ contains traces and also a certain amount of Mg)
What's the secret?As fate would have it, I've since learned there is an easier way to handle that dilution issue...
My LFS is pushing aquaforest system on me. I would appreciate some input on a cost analysis and results vs a BRS style 2 part from someone who had used both.
One point the LFS guys was siting as a major pro was salinity control as AF introduces less salts.