BRS RODI not working!

Dylan7huskies

Active Member
View Badges
Joined
Aug 16, 2019
Messages
189
Reaction score
55
What state or country do you live in
New York
Rating - 0%
0   0   0
Hey guys so I purchased a bulk reef supply RODI system and it’s not working at all. Yes I have the correct water pressure before someone asks lol. I noticed the 3rd cylinder is not getting any water to it and the elbow connecting the membrane to the good water is leaking. I spoke with BRS and they are sending me a new elbow piece. I’m hoping this will fix the issues. Please let me know if there’s anything other fixes I could try or if anyone else has had this issue!!
31848FF5-83FB-4497-90BD-21561AB6155E.jpeg
AA99ECD4-F016-4316-AD24-862F1860EA15.jpeg
749202D7-4AEB-4687-BB73-1917DD25FDFF.jpeg
 
I thought the booklet I got with my 6-stage said it was not unusual for one or two of the last chamber(s) to not become full...
 
I had this issue when I first hooked mine up. Couldn't figure out why it wasn't working and it turned out I had the flush valve in the wrong position. It needs to be closed.
Could you send a picture of what right looks like?
 
As shown in that photo-- with the black valve handle perpendicular to the tubing-- you would be making 'good' RODI water into you bucket (Blue tubing, on a BRS system). You would not be flushing out the filter canisters-- to get the 'yucky' water out to your drain (Black tubing, on a BRS system). To flush the canisters of sediment deposits, turn the valve handle until it is parallel to the unit/tubing lines.
 
Last edited:
As shown in that photo-- with the black valve handle perpendicular to the tubing-- you would not be making 'good' RODI water into you bucket (Blue tubing, on a BRS system). You would only be flushing out the filter canisters, and getting 'yucky' water out to your drain (Black tubing, on a BRS system). To make 'good' RODI water, turn the valve handle until it is parallel to the unit/tubing lines.

But at least now you know how to flush the canisters of sediment deposits, as well.

That is the opposite instructions from the BRS FAQ in the manual

Q: I know I have good pressure, but all of the water is rushing down the drain and I’m barely getting any product water; what’s going on?
A: It’s not uncommon to accidentally leave the flush valve in the open/flush position. For normal water production, the valve should be the closed/perpendicular position, as illustrated. Only during membrane flush should the valve be parallel with the line.
 
MY BAD. I don't drink coffee, but let's just blame it on 'I didn't have my coffee yet.' :rolleyes: I edited my reply, because I did in fact have it backwards-- the answer is now correct (as is the BRS booklet); I just went to my unit to be sure-- parallel to the tubing flushes, perpendicular makes RO/DI.
 
at least you got a booklet....mine came with a little one for the tds meter and absolutely nothing for the ro/di itself...tried to e mail them and they never got back to me so i assumed there were no instructions....been watching their videos and taking notes to try to figure this thing out
 
92493656-5DAF-4AB0-ACB7-B8F6018834A6.jpeg
It can be a little intimidating, especially if you have the booster pump, but if I can help (or this photo can), holler out.
 
Mine did not come with that lever
 
MY BAD. I don't drink coffee, but let's just blame it on 'I didn't have my coffee yet.' :rolleyes: I edited my reply, because I did in fact have it backwards-- the answer is now correct (as is the BRS booklet); I just went to my unit to be sure-- parallel to the tubing flushes, perpendicular makes RO/DI.
Mine doesn’t have that! I posted a picture!
 
As shown in that photo-- with the black valve handle perpendicular to the tubing-- you would be making 'good' RODI water into you bucket (Blue tubing, on a BRS system). You would not be flushing out the filter canisters-- to get the 'yucky' water out to your drain (Black tubing, on a BRS system). To flush the canisters of sediment deposits, turn the valve handle until it is parallel to the unit/tubing lines.
I don’t have that ! I put a picture in
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 24.5%
  • I’d trust someone who knows my tank to choose

    Votes: 9 8.5%
  • I’d rather get a gift card and pick it myself

    Votes: 43 40.6%
  • I’d prefer gear or supplies instead

    Votes: 2 1.9%
  • Please don’t surprise me with livestock

    Votes: 26 24.5%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new