Bubble magus trouble- help!!

jtf74

Well-Known Member
View Badges
Joined
May 20, 2020
Messages
751
Reaction score
537
Location
Florissant
Rating - 0%
0   0   0
About two weeks ago stopped skimming. Motor still runs and pumps but no fine bubbles. Motor didn't seem gunked or air line blocked. Been running for 2 years. If I unplug and plug back in it works for a day or so then stops producing fine bubbles. Any thoughts?
 

T-J

2500 Club Member
View Badges
Joined
Nov 11, 2019
Messages
3,502
Reaction score
3,988
Location
Phoenix
Rating - 0%
0   0   0
No bubbles means no air or the needle wheel isn't spinning. Have you verified that all of the airlines are completely clear and that the needle wheel spins when the pump is on?
I don't own a bubble magus, but I assume that's how it makes its bubbles.
 

Shufflepig

Active Member
View Badges
Joined
Mar 18, 2018
Messages
447
Reaction score
665
Location
Pittsburgh
Rating - 0%
0   0   0
No bubbles means no air or the needle wheel isn't spinning. Have you verified that all of the airlines are completely clear and that the needle wheel spins when the pump is on?
I don't own a bubble magus, but I assume that's how it makes its bubbles.
Agree with this. I have a bubble magnus which did the same thing. When I removed the needle wheel there were 3 small snails lodged in it. Once removed it started working normally again. Also need to not only check the air line but the Venturi connection port. Make sure that connection port is free of debris.
 

JD_Inshore

Community Member
View Badges
Joined
Oct 13, 2018
Messages
81
Reaction score
93
Location
Lakeland, FL
Rating - 0%
0   0   0
I had one for several years and every time it stopped it was because the small plastic piece that goes inside of the airline was crusted completely shut. I circled it in the picture. That white piece pulls right and out you can poke something in it to clear it or soak it in vinegar.
 

Attachments

  • Screenshot_20210719-204657_Chrome.jpg
    Screenshot_20210719-204657_Chrome.jpg
    60.4 KB · Views: 119

Glenner’sreef

2500 Club Member
View Badges
Joined
Oct 27, 2017
Messages
4,232
Reaction score
12,493
Location
ARIZONA
Rating - 0%
0   0   0
I’ve had my Curve 7 for 5 years. It’s great! One reoccurring annual problem is underwater salt buildup in the water/air intake valve. If you don’t wish to take your skimmer completely apart, you can remove the airline (which sits under water) and lightly chop the salt buildup in the valve. Good luck.
3EEA0248-6839-4255-86AC-419A2E1AD964.jpeg
 
OP
OP
jtf74

jtf74

Well-Known Member
View Badges
Joined
May 20, 2020
Messages
751
Reaction score
537
Location
Florissant
Rating - 0%
0   0   0
I had one for several years and every time it stopped it was because the small plastic piece that goes inside of the airline was crusted completely shut. I circled it in the picture. That white piece pulls right and out you can poke something in it to clear it or soak it in vinegar.
Thanks everyone. I'll check that. Bet that's it.
 

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new