Calcium Nitrate question

[marke]

I know a few people have used Potassium Nitrate as a nitrate additive. Would Calcium Nitrate fall in the same boat with sodium nitrate, strontium nitrate, and pot nit? Or is there any unknown issues with CaNo3? Randy?

 

[Randy Holmes-Farley]

All of these nitrates should be fine: sodium, potassium, calcium, magnesium.

I probably wouldn't use strontium nitrate as it may push strontium too high. Not only is strontium by far the lowest of these in seawater, it is the largest percentage metal in the nitrate.

 

[rosshamsandwich]

is there a dosage recommendation?

 

[Randy Holmes-Farley]

One posted question is enough. lol

Do you have a scale for weighing it? Or do you want a less accurate teaspoon recipe?

 

[Randy Holmes-Farley]

Assuming you have a scale, calcium nitrate is 76% nitrate by weight.

Dissolve 10 grams in 1 L of water, and that solution is 10,000 mg * 0.76 / 1 L = 7,600 ppm.

Adding 1 mL of that solution per liter of tank water will boost nitrate by 7,600/1000 = 7.6 ppm.

So 1 ml per 8 L adds about 1 ppm. :)

 

[rosshamsandwich]

teaspoon recipe please?

 

[rosshamsandwich]

Thank you!!!!

 

[rosshamsandwich]

I bought this one. I hope it's okay:

https://www.amazon.com/gp/product/B0744QV9XW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

[Randy Holmes-Farley]

That's an odd one that one intentionally contains ammonia. It wouldn't have been my choice since it isn't labeled for purity and intentionally has ammonia. You can likely use it, but add very small doses at a time. Not more than 0.2 ppm nitrate, IMO.

I would assume a level teaspoon of it is about 5 grams, so for the stock solution I suggested, use 2 level teaspoons per 1 L of water.

 

[rosshamsandwich]

Where to buy then?

 

[Randy Holmes-Farley]

There are many options. There's no special reason to use calcium nitrate.

food grade sodium nitrate:
https://www.etsy.com/listing/222600000/sodium-nitrate-8-ounces-fine-powder-996

food grade potassium nitrate:
https://www.butcherspantry.com/curing-ingredients/fccusp-food-grade-potassium-nitrate-kno3-saltpetre

industrial grade potassium nitrate:
Spectracide stump remover

 

[rosshamsandwich]

Thank you, Randy!

 

[rosshamsandwich]

What about dry dosing? Can I just put a pinch into my sump every week?

 

[Randy Holmes-Farley]

What about dry dosing? Can I just put a pinch into my sump every week?

Yes, that should be fine, as long as its an appropriate size pinch.

 

[Bnichols124]

@Randy Holmes-Farley

Correct me if I'm wrong please

10g to 1000ml rodi = 47ml dose to add 1 ppm in a 100gal

If I reduce to 250ml of rodi and 10g I should be around 11.75 ml to add 1 pmm in 100 g


Using

 

[Randy Holmes-Farley]

@Randy Holmes-Farley

Correct me if I'm wrong please

10g to 1000ml rodi = 47ml dose to add 1 ppm in a 100gal

If I reduce to 250ml of rodi and 10g I should be around 11.75 ml to add 1 pmm in 100 g


Using

No quite.

I do not know if that product is adequately pure or not, but assuming so, it is about 53% nitrate by weight (it is not anhydrous calcium nitrate).

10 grams contains about 5,300 mg of nitrate.

Dissolve that in 250 mL, then it is 5300 mg/250 mL = 21 mg/mL.

100 gallons is 378 L, so to add 1 ppm to 100 gallons, you need to add 378 mg.

378 mg /21 mg/mL = 18 mL.