Calcium reactors

  • Thread starter Thread starter redpenny1
  • Start date Start date
  • Tagged users Tagged users None

redpenny1

New Member
View Badges
Joined
Aug 9, 2013
Messages
23
Reaction score
3
Location
Lost Creek Wv
Rating - 0%
0   0   0
What is the cheapest way to set up a calcium reactor? I have a 40 gallon nuvo and need some ideas. Or would dosing be better?
 
I'd dose a tank that small unless you have lots of sps and high uptake of alkalinity
 
+1, i have a 240 and I’m just leaning on the side of getting one. Any smaller and a doser would be much easier imo
 
Milwaukee ph monitor and co2 regulator, aquamaxx nano reactor, cobalt 400 pump and a 5lb co2 tank.
 
Dose that size tank.. Look at Tropic Marin All for reef.
 
Calcium reactor would still be an easier option once setup. I use one on every system i have even my nano which is a 35 gallon.
 
I agree with @C. Eymann . Calcium reactors are definitely the most stable and once dialed in, the easiest price of equipment we use..
There is a cost associated with running one. On the order of $1000 all in. They can be had cheaper by buying used, but I wouldn't trust used/old pH probes and the like so even buying used there is still an additional cost associated.
Is it worth it, IMO, yes. Is dosing a legitimate alternative? Absolutely.
For me, having a large SPS tank made the decision easy. On a 40 gallon... If I had the means to purchase run a CaRx, I absolutely would.
 
I have the same type of question on a Reefer 750XXL (160 gallons). I've been using Kalk in my ATO but now it appears that isn't keeping up. I still have to dose ~100 ml of alkalinity a day to keep my Alk around 8.6. I've been looking at Neptune DOS as I managed to get a Trident and going with Trident controlled dosing or a Calcium reactor.

And along those lines would you recommend continuing to use kalk in my ATO and dose/Calcium reactor for the difference? Or go to just water in my ATO and dose/Calcium reactor for all of it?
 
I have the same type of question on a Reefer 750XXL (160 gallons). I've been using Kalk in my ATO but now it appears that isn't keeping up. I still have to dose ~100 ml of alkalinity a day to keep my Alk around 8.6. I've been looking at Neptune DOS as I managed to get a Trident and going with Trident controlled dosing or a Calcium reactor.

And along those lines would you recommend continuing to use kalk in my ATO and dose/Calcium reactor for the difference? Or go to just water in my ATO and dose/Calcium reactor for all of it?

I'd continue to add kalk to ATO for its pH raising benefits, also you wont have to tune the reactor as aggressively/ save on CO2 and media.

I consider the combination of a kalkwasser reactor/stirrer or kalk+ATO in addition to a calcium reactor to be the best setup to keep up with mineral demand.


Just my .02
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new