If you Really wanted to do this, here is the best solution with just a little extra effort:
1. Measure the cabinet
2. make a typical diy stand top out of 2x3.
3. cut ¾ ply to dimensions of cab sides & back plus 2.5" H to match total height w frame on top ..paint/ stain andcscrew into top frame on on back & sides.
4. Cut ¾ ply to fit top frame + 1.5 " w & d to cover tops of ply. Screw into frame
5. Connect back ply corners w painted l brackets. At least 3 each.
6. Trim the front ply edges and top frame front face.
Back ply can be scored ro wall & then take out drawer & screw cab to ply.
Onecstep better would be same except Make a box/frame for each side with 2x3 laying flat against the cabinet. On each side..THEN face with ply.
I just moved about 15 of these from work and if they are quality commercial ones they should hold the weight fine.. The Best point is the drawer shift tho.
I'm doing this temp but mine is shorter door front supply cab & already has wood top.