Britxcdn
New Member
- Joined
- Aug 4, 2021
- Messages
- 21
- Reaction score
- 15
- Location
- Toronto, ON
- What state or country do you live in
- Canada
Hey All,
For any Canadian people who have been having trouble getting their hands on Gluemasters Thin glue for their aquascapes, I tired about 6 different glues on test pieces and by far the BEST alternative I found is CECCORP's Extra Thin. Runs like water and sets almost instantly when using the substrate sprinkling method:
1. Cover your joint in rock dust/sand
2. Apply glue to the joint
3. About 20 seconds later repeat steps 1 & 2
4.. You'll see the small puff of vapour kick up instantly and you'll know the reaction is occuring
USE IN A WELL VENTILATED AREA, Stuff is strong while it's setting.
Anyway, hope this helps folks. It allowed me to pull of my scape in about 2 hours.
For any Canadian people who have been having trouble getting their hands on Gluemasters Thin glue for their aquascapes, I tired about 6 different glues on test pieces and by far the BEST alternative I found is CECCORP's Extra Thin. Runs like water and sets almost instantly when using the substrate sprinkling method:
1. Cover your joint in rock dust/sand
2. Apply glue to the joint
3. About 20 seconds later repeat steps 1 & 2
4.. You'll see the small puff of vapour kick up instantly and you'll know the reaction is occuring
USE IN A WELL VENTILATED AREA, Stuff is strong while it's setting.
Anyway, hope this helps folks. It allowed me to pull of my scape in about 2 hours.
