Carbon Filtering Skimmer Intakes?

nautical_nathaniel

Indecision may or may not be my problem.
View Badges
Joined
Feb 19, 2014
Messages
4,881
Reaction score
12,086
Location
West Palm Beach, FL
Rating - 0%
0   0   0
Hey folks,

I'm dealing with some STN on several of my Acropora, among other coral issues, in my 20 galling reef right now and I have a hunch the issue might be in the air...

My apartment is currently under exterior construction right now and the contractors are using some fairly potent waterproofing chemicals, "Florida-Grade" adhesives, and exterior paints, all of which put off quite the odor and leave a chemical-like taste in your mouth. In response, my girlfriend and I have had to incorporate a few fragrance diffusers and we burn scented candles when we are home since the smell of the chemicals gives us some strong migraines.

All of these chemicals in the air are bound to have some sort of effect on my tank, so I wanted to see if you guys and gals think incorporating some sort of carbon air filter to my skimmer intake tube would be a good idea. Right now there is one of those noise reducers hooked to it (see picture below).

15542378809192600586055211553849.jpg


What do you guys think? Would a small carbon air filter help my tank any, or would I still be on the losing side due to passive air diffusion into the tank? Have any of you incorporated something similar to your skimmer intake?
 

Ranjib

7500 Club Member
View Badges
Joined
Apr 16, 2016
Messages
9,876
Reaction score
16,680
Location
Pleasant Hill, Concord
Rating - 0%
0   0   0
Sounds like a good plan of attack. 20g is a tough size for sps. Let me read through your tank journal :-)
 

Art2249

Active Member
View Badges
Joined
Apr 22, 2018
Messages
468
Reaction score
461
Rating - 0%
0   0   0
I have a Curve B9 that pulls a lot of air from the outside. I won't say my neighbor is a hillbilly BUT HE'S A HILLBILLY! Constantly burning brush, stumps etc. I ordered some coconut shell carbon and made a filter using 2" pvc and a 2" shower drain with foam to keep it from falling out.
 
OP
OP
nautical_nathaniel

nautical_nathaniel

Indecision may or may not be my problem.
View Badges
Joined
Feb 19, 2014
Messages
4,881
Reaction score
12,086
Location
West Palm Beach, FL
Rating - 0%
0   0   0
I have a Curve B9 that pulls a lot of air from the outside. I won't say my neighbor is a hillbilly BUT HE'S A HILLBILLY! Constantly burning brush, stumps etc. I ordered some coconut shell carbon and made a filter using 2" pvc and a 2" shower drain with foam to keep it from falling out.
Can you tell if it made any noticeable improvement? PVC fittings were going to be my plan of attack as well with some plain filter floss and granulated carbon (BRS ROX 0.8 most likely).
 
OP
OP
nautical_nathaniel

nautical_nathaniel

Indecision may or may not be my problem.
View Badges
Joined
Feb 19, 2014
Messages
4,881
Reaction score
12,086
Location
West Palm Beach, FL
Rating - 0%
0   0   0
Can you buy a bit of tubing and run the intake out a window temporarily???
I would need like 30 feet of tubing, plus my cat would make it a perforated tube pretty quickly.
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 34 28.1%
  • 100% dry rock + 100% live sand

    Votes: 41 33.9%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 27 22.3%
  • 75% live rock, 25% live sand

    Votes: 11 9.1%
  • 25% live rock, 75% live sand

    Votes: 8 6.6%
Back
Top