Carbon reactor!m?

[Notsolostfish]

Do they sell all in one carbon reactor easy to change? Twist dump? I tried the aqua ready today for brs carbon 0.8 and the carbon flew everywhere can someone PLEASE recommend something push a button to unlock or something

 

[lapin]

Lifeguard aquatics makes a good one.
Two little fishes make hang on the sump units but need a small pump to run them

 

[Naekuh]

Do they sell all in one carbon reactor easy to change? Twist dump? I tried the aqua ready today for brs carbon 0.8 and the carbon flew everywhere can someone PLEASE recommend something push a button to unlock or something

i dont think it gets easier then aquaready sigma....
What do you mean push a button?

And did u pack it right? the foam should sandwitch the media, and should prevent it from flying everywhere.
If your after the tumble effect, i would put get extra sponge and put it at the top.

 

[Notsolostfish]

Do they sell all in one carbon reactor easy to change? Twist dump? I tried the aqua ready today for brs carbon 0.8 and the carbon flew everywhere can someone PLEASE recommend something push a button to unlock or something

AquaReady Sigma series...

It used to be called AquaMax.

Sigma 1 Media Reactor

S-1 Media Reactor Sigma 1 Media Reactor The Sigma-1 Media Reactors is an innovative way to help remove organic pollutants, odors, discoloration, and algae-fueling nutrients by optimizing the performance of GFO, carbon, and other filter media. Featuring a detachable media canister...

www.getaquaready.com

here is a video from BRS on it.

Yeah tried that today didnt work. Followed instructions to the T my brs 0.8 carbon started flying in the sump

 

[Naekuh]

Yeah im sorry i misread your post...

So i edited it...

Yeah tried that today didnt work. Followed instructions to the T my brs 0.8 carbon started flying in the sump

Can you take a picture of how you packed it?
I never had issues with carbon...u could probably put it in a mesh bag and then in the reactor then if its going everywhere unless again your after the tumble effect which i don't think you should with rox carbon.

 

[Notsolostfish]

Yeah im sorry i misread your post...

So i edited it...



Can you take a picture of how you packed it?
I never had issues with carbon...u could probably put it in a mesh bag and then in the reactor then if its going everywhere unless again your after the tumble effect which i don't think you should with rox carbon.

I put the bottom sponge, put carbon which for my tank 150G 15tsbps. Put another sponge that came with it. Put the disc. Put it inside my sump. Started the reactor. Top sponge flew to the top. And the carbon skippped the reactor and it started escaping to my sump,…

 

[Naekuh]

I put the bottom sponge, put carbon which for my tank 150G 15tsbps. Put another sponge that came with it. Put the disc. Put it inside my sump. Started the reactor. Top sponge flew to the top. And the carbon skippped the reactor and it started escaping to my sump,…

yeah i had that happen once...

I would fill it in a mesh bag then and then put it in the reactor.
Since its not GFO and does not need to be lightly tumbled.

I had problems with it when using GFO tho, so i would double pack the sponge at top and get another sponge for the bottom.

 

[Notsolostfish]

I put the bottom sponge, put carbon which for my tank 150G 15tsbps. Put another sponge that came with it. Put the disc. Put it inside my sump. Started the reactor. Top sponge flew to the top. And the carbon skippped the reactor and it started escaping to my sump,…

yeah i had that happen once...

I would fill it in a mesh bag then and then put it in the reactor.
Since its not GFO and does not need to be lightly tumbled.

I had problems with it when using GFO tho, so i would double pack the sponge at top and get another sponge for the bottom.

So u recommend get a media bag. Put the carbon in the bag? And that shouldnt happens anymore?

 

[Naekuh]

So u recommend get a media bag. Put the carbon in the bag? And that shouldnt happens anymore?

yes.. the media bag will keep it in place.
And the reactor pushes water though the chamber, so its the same thing.
It will also make you dumping the carbon easier if its from the bag vs from the chamber, as i usually need to use a siv for that.

 

[Notsolostfish]

yes.. the media bag will keep it in place.
And the reactor pushes water though the chamber, so its the same thing.
It will also make you dumping the carbon easier if its from the bag vs from the chamber, as i usually need to use a siv for that.

Ordered some media bags. Arriving tmw im gonna try again. That shoupd 100% work carbon should have no place to escape. And even if the carbon gets pushed to the top. It shoupd compress and not tumble

 

[Notsolostfish]

yes.. the media bag will keep it in place.
And the reactor pushes water though the chamber, so its the same thing.
It will also make you dumping the carbon easier if its from the bag vs from the chamber, as i usually need to use a siv for that.

Btw what speed i should start the reactor at when i get the media bags tmw? Put the reactor at the slowest speed?

 

[USN74NMCB]

I got the BRS gfo and carbon reactor based off two ro canisters that came with a pump and pipe to plumb it in works well for my setup

 

[Naekuh]

Btw what speed i should start the reactor at when i get the media bags tmw? Put the reactor at the slowest speed?

i set mine on full speed, unless again its GFO which needs to be tuned and gently tumbled.

You can also pack polyfill in the bottom and double sponge up top.
Polyfill is the filter floss we use, but the cheaper name for it.

 

[Notsolostfish]

Btw what speed i should start the reactor at when i get the media bags tmw? Put the reactor at the slowest speed?

i set mine on full speed, unless again its GFO which needs to be tuned and gently tumbled.

You can also pack polyfill in the bottom and double sponge up top.
Polyfill is the filter floss we use, but the cheaper name for it.

The media bag alone wont cut it?

 

[ptrusk]

Personally, I think Rox sucks for a reactor. It floats. Its small. I use bituminous for reactors. The only place i use rox is in small bags in my nanos.

Bagging in a reactor might work, but its still gonna float.

 

[Naekuh]

The media bag alone wont cut it?

it will... im saying if u went with GFO.

The media bag will hold everything in it... and even if it floats it wont matter, because the bag contains it.
The problem i think ur seeing from what i remember is the sponge will slip to the side and go in a 45 degree angle, which spills the contents under higher flow.

The bag will prevent it from spilling.

So just bag it... put it in the reactor, and then dont worry about it.

The reactor still does it thing by forcing water though the entire contents in the chamber. If anything it may get dirty faster because its filtering though the bag as well as the sponges.

 

[ptrusk]

Yup. And rely on your experience rather than marketing. The cheap stuff has worked for decades.

 

[Notsolostfish]

it will... im saying if u went with GFO.

The media bag will hold everything in it... and even if it floats it wont matter, because the bag contains it.
The problem i think ur seeing from what i remember is the sponge will slip to the side and go in a 45 degree angle, which spills the contents under higher flow.

The bag will prevent it from spilling.

So just bag it... put it in the reactor, and then dont worry about it.

The reactor still does it thing by forcing water though the entire contents in the chamber. If anything it may get dirty faster because its filtering though the bag as well as the sponges.

 

[Notsolostfish]

it will... im saying if u went with GFO.

The media bag will hold everything in it... and even if it floats it wont matter, because the bag contains it.
The problem i think ur seeing from what i remember is the sponge will slip to the side and go in a 45 degree angle, which spills the contents under higher flow.

The bag will prevent it from spilling.

So just bag it... put it in the reactor, and then dont worry about it.

The reactor still does it thing by forcing water though the entire contents in the chamber. If anything it may get dirty faster because its filtering though the bag as well as the sponges.

I hope they dont escape the bag

The residue probably
From
The sponges