check valve co2 clogged?

[Andres Ricardo perez]

I have a problem with the reactor, the solenoid turns on and off sounds click but sometimes it turns on but no bubbles , can it be the valve co2 check valve blocks the co2? presure is ok

 

[Ty Hamatake]

Blow through it... I was just about ready to pull my hair out trying to figure out why a solenoid "wasn't working" until someone suggested I do just that. Turns out it was fine and I was experiencing operator error :)

 

[billwill]

If it's intermittent, I'd invest the $15 for a higher quality low burst pressure check valve. If it's never worked, take it off, blow through it, and make sure the direction is correct.

 

[billwill]

If it's intermittent, I'd invest the $15 for a higher quality low burst pressure check valve. If it's never worked, take it off, blow through it, and make sure the direction is correct.

 

[Andres Ricardo perez]

It's fail 1/50 times clogged, no co2 bubbles solenoid work ok.

 

[RedSox81]

I just had the same problem and it was the check valve. I pulled the line off and co2 was coming out. I hooked line direct to reactor without the check valve and had a bubble. With valve in place I didn’t have anything