Controlling phosphate

adamsfour

Active Member
View Badges
Joined
Jul 26, 2019
Messages
284
Reaction score
122
Location
Leesburg
What state or country do you live in
Virginia
Rating - 0%
0   0   0
Looking for recommendations. Over the last 3 months I have been trying to control my Phosphate and Nitrate. I stood up a sulfur reactor and I know can control my nitrate. For phosphate I am running a GFO reactor. It working too good and I can’t maintain any meaningful phosphate. Any recommendations on how to maintain some phosphate.
 
I wouldn't overfeed. By feeding stuff you are adding nitrogen and organics as well which you might not want. For a controlled addition of phosphate only, use a DIY solution.
 
Looking for recommendations. Over the last 3 months I have been trying to control my Phosphate and Nitrate. I stood up a sulfur reactor and I know can control my nitrate. For phosphate I am running a GFO reactor. It working too good and I can’t maintain any meaningful phosphate. Any recommendations on how to maintain some phosphate.
If you quit all things that can eliminate po4 in a unnatural way, like GFO, adding organic carbon (a sort of natural export but uncontrolled) , I wouldn't immediately dose po4 when low values as long as you feed the tank, fishes and maybe also some organic coral food.
Your question is good because we know very well from scientific studies that ultralow po4 is bad for the zooxanthelle =bad for the coral. But we also know that coral is extremely good at extraction po4 if needed as long as its not true zero thanks to active transport channels. So ny opinion is:
1) to always be very careful with unnatural way to eliminate po4 (Like gfo and similar, carbon) and stop with these immediately if po4 is below 0.02
2) better too high than too low
3) ideal value? Like 0.04-0.1 (there is no benefits having excess of po4 either)
4) if between 0.00-0.02 but no unnatural methods that will bring it down further, I would not dose po4 but just feed fish and coral. If coral looks pale despite this, I would dose po4 up to 0.04.

Jonas
 
Looking for recommendations. Over the last 3 months I have been trying to control my Phosphate and Nitrate. I stood up a sulfur reactor and I know can control my nitrate. For phosphate I am running a GFO reactor. It working too good and I can’t maintain any meaningful phosphate. Any recommendations on how to maintain some phosphate.
What were your numbers like that you wanted to deploy the extra filtering methods?

Based on your report of the results, I would just say decomission the extra filtration.....but I also want to hear what the preconditions were.
 
I cannot see any reason to use any GFO if you cannot detect phosphate.

Stop that, then see if there's an issue.
 
What are your numbers? Why not just turn off the gfo reactor?
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 11 22.0%
  • Powerheads or wavemakers

    Votes: 4 8.0%
  • Sump or rear filtration chambers

    Votes: 7 14.0%
  • Skimmer or other filtration equipment

    Votes: 6 12.0%
  • Overflow or plumbing

    Votes: 10 20.0%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 11 22.0%
  • Other—tell us what I missed

    Votes: 1 2.0%
Back
Top
Home
Post thread…
Market
What's new