Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Just wondering if an anemone could get shredded by this pump, because I just got one
Likely hood depends if the nem finds a spot it likes quickly and settles down. That it doesn’t decided to walk on the glass or on rock structures near the power head. Plenty of people have nems eaten up this way. Best to be over prepared (add nem guards now) than have a nem slurryCould it? Yes.
Is it likely? Not really...
There is always the off chance it gets up there and gets its tentacles or foot inside somehow. Nems gonna do what nems gonna do. Like Lapin said, find it a good home, and hope for the best.
This thread is worth checking out: https://www.reef2reef.com/threads/how-to-attach-mount-an-anemone.643645/#post-6442150
I mean yes, if you run them bare, the likelihood goes up, he's got the foam protector covering the powerhead intake, and the propellers on that pump look pretty recessed. If a nem doesn't settle immediately, and starts to float around, and decides it wants to attach itself to the powerhead, then sure, it could 'walk' on the exposed side pushing off the foam protection and get its tentacles or foot in the backside and get sucked in. But, the odds of those events taking place are relatively slim. Anything can happen... But the fact he has the intakes covered in foam make it much less likely that it *will* happen.Likely hood depends if the nem finds a spot it likes quickly and settles down. That it doesn’t decided to walk on the glass or on rock structures near the power head. Plenty of people have nems eaten up this way. Best to be over prepared (add nem guards now) than have a nem slurry
But, the odds of those events taking place are relatively slim. Anything can happen... But the fact he has the intakes covered in foam make it much less likely that it *will* happen.
And it will happen while you’re asleep because why the heck not! Not even while your at work, but asleep peacefully in your bed.You would think right
Seen it happen so many times it’s stupid. Usually as stated right after a split. My bet is if it happens it won’t be foam falling off or foot. It will be tentacles one by one getting sucked under the foam.
Your experiences are polar opposite mine. More than 20 years, hundreds of anemone's hundreds of split events (Hell I've had 12 splits in the last year) in all different sized tanks, more powerheads than I can count, purchased anemone guards = 0. Injured or Dead Anemone's due to powerheads = 0. I mean, I've seen the stories on the internet, and I've seen the photo and video evidence, so I know it happens. It just seems like a very very small minority of total anemone owners out there that have this problem. Which is why I said it's unlikely... Statistically, even if it does happen to him, out of 10,000 anemone owners, it might happen to a handful, maybe even a dozen, probably not much more than that though...You would think right
Seen it happen so many times it’s stupid. Usually as stated right after a split. My bet is if it happens it won’t be foam falling off or foot. It will be tentacles one by one getting sucked under the foam.
Believe it or not….i think their are more men guards being 3D printed then you realize!Your experiences are polar opposite mine. More than 20 years, hundreds of anemone's hundreds of split events (Hell I've had 12 splits in the last year) in all different sized tanks, more powerheads than I can count, purchased anemone guards = 0. Injured or Dead Anemone's due to powerheads = 0. I mean, I've seen the stories on the internet, and I've seen the photo and video evidence, so I know it happens. It just seems like a very very small minority of total anemone owners out there that have this problem. Which is why I said it's unlikely... Statistically, even if it does happen to him, out of 10,000 anemone owners, it might happen to a handful, maybe even a dozen, probably not much more than that though...
Don't get me wrong, I wouldn't tell someone not to get a nem guard, they serve a purpose, but in reality, they're only made for like 10 pumps on the market, everything else is a custom hassle nightmare of sending your pump to the person making them so they can whip something up in AutoCAD using your pumps specific dimensions... Those pumps look pretty generic, so I am betting the foam is the best OP's gonna get without sending his pump out to someone who makes them custom.
really? Cause a buddy of mine asked me to help him find some for his Sicce SDC's he bought off of me, we found one guy on Etsy who made them, no one else, not sold at any stores, couldn't even find an STL file for them. This was about 12-18 months ago. We ordered them, and they press fit onto the pumps, but wouldn't stay on, they were just a simple oval shape, no attachment points, nothing. And Sicce is a top brand... LOL...Believe it or not….i think their are more men guards being 3D printed then you realize!
Yeh, the voyagers have them, I saw a few people making it for those, but they're not the same form factor. The SDC's and the regular XStreams carry the same form factor, but the regular X-Streams are all different sizes, and the SDC's only share the size of one of the 3... So it's kind of hard to find (this is actually the route we had to go initially because no one was making them specifically for the SDC (WiFi Controllable) version.It looks like other Sicce powerheads have guards available
Eh maybe I’m wrong but there is definitely more now then there was a year ago