cube in wall

[baywindow]

Putting an almost cube shaped aquarium in a wall, around 90gallon or 320 liters as we sas in europe, a room divider viewable from two sides. On this picture a stand, which is a good beginning.

 

[andrewey]

Nice! Where in Europe are you located?

 

[baywindow]

I'm in Stockholm, Sweden. And this is a picture of a hole in the wall. Now it only needs a reef.

 

[mefisto]

Nice.
The panels on both sides can be removed I guess? For full servicing and maintenance?

 

[baywindow]

It is in a niche in the wall, I made a plywood prototype. So servicing is from one side, and it will be a bit tight to get to the left and right inner sides. I will leave about an inch so maybe magnets to powerheads can be used.

 

[vetteguy53081]

It is in a niche in the wall, I made a plywood prototype. So servicing is from one side, and it will be a bit tight to get to the left and right inner sides. I will leave about an inch so maybe magnets to powerheads can be used.

Very ingenious

 

[Reefkeeper14]

It is in a niche in the wall, I made a plywood prototype. So servicing is from one side, and it will be a bit tight to get to the left and right inner sides. I will leave about an inch so maybe magnets to powerheads can be used.

The cabinet opening is really sweet! awesome build so far, good luck