Custom cut acrylic sources...

  • Thread starter Thread starter Dom
  • Start date Start date
  • Tagged users Tagged users None

Dom

Theoretical Reef Keeper
View Badges
Joined
Apr 29, 2016
Messages
7,882
Reaction score
8,331
Location
NY
Rating - 0%
0   0   0
Can anyone recommend a business that custom cuts acrylic?

Thanks.

Dom
 
Location? There are usually some smaller mom-n-pop local businesses that have good prices.

All the local places here are glass. I'm building an all in one so I can't use glass. I don't want light spilling into the filter areas.
 
Ask for Dan at Advanced Acrylics in Anaheim CA. Depending on what you need he may be up for it. Just picked up a custom ATO from him. Great stuff.
 
Can anyone recommend a business that custom cuts acrylic?

Thanks.

Dom
Jeff @ lifereef will take care of ya, I’ve always had excellent pieces from him- and great communication to boot.

Also- you can do a LOT with a scorer, scroll saw w/ plexi blade and water. Just clamp your acrylic to a thin sheet of ply to reinforce (fully), have someone spray water around the saw and DONT STOP, take your time- it won’t bind if you’re full bore on the jig. For straight cuts a Tsquare & scorer (I used one for tile-heavy duty)and patience will do ya just fine.
I successfully modified a ghost oF from reef savvy (foolish but it turned out :)
 
Depends what you are trying to do. I can make square cuts in acrylic sheet easily on my tablesaw with a laminates blade. Wood routers work fine as well. Cutting larger diameter tube can be harder.You can make jigs for the job but usually I just order larger diameter tube precut.
 
Is there anyone you guys know of that can fabricate large acrylic cylinders? I imagine the shipping would probably kill it. I am in WI so IL would also be very feasible.
 
What exactly are you looking to get cut?

I'm planning a new build which requires (2) pieces of black acrylic, dimensions:

(11 7/8 wide) x (14 5/8 high) x (3/8 thick).

It is going to be an All-In-One. The Black acrylic sheets are going to siliconed in to create 2 chambers, on e on each side of a 48" tank.

I am going to connect these chambers with PVC piping under the sanded of the display to that I can maintain a symmetrical appearance to the tank.
 
Last edited:
Ask for Dan at Advanced Acrylics in Anaheim CA. Depending on what you need he may be up for it. Just picked up a custom ATO from him. Great stuff.

I'll check them out!
 
Jeff @ lifereef will take care of ya, I’ve always had excellent pieces from him- and great communication to boot.

Also- you can do a LOT with a scorer, scroll saw w/ plexi blade and water. Just clamp your acrylic to a thin sheet of ply to reinforce (fully), have someone spray water around the saw and DONT STOP, take your time- it won’t bind if you’re full bore on the jig. For straight cuts a Tsquare & scorer (I used one for tile-heavy duty)and patience will do ya just fine.
I successfully modified a ghost oF from reef savvy (foolish but it turned out :)

I was feeling a bit lazy, so I though if it was pre-cut, I could get right into installation when it arrived.
 
I was feeling a bit lazy, so I though if it was pre-cut, I could get right into installation when it arrived.
Man I’d shoot Jeff [email protected] an email with your dimensions/general idea and he’ll make it fly- he did right by me on a b&w skimtrooper

85497B05-CC4E-4191-AEF9-4A23D5D11301.jpeg
 
Last edited:

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 13.8%
  • Lighting, pumps, or other major equipment

    Votes: 4 13.8%
  • Controllers, testing, dosing, or automation gear

    Votes: 3 10.3%
  • Dry goods and restocks, like salt, media, or food

    Votes: 3 10.3%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 27.6%
  • Fish or other livestock

    Votes: 1 3.4%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.4%
  • I’m browsing, but don’t have a specific target

    Votes: 4 13.8%
  • I’m not shopping for reef deals this year

    Votes: 1 3.4%
  • Other (Post in the comments)

    Votes: 1 3.4%
Back
Top
Home
Post thread…
Market
What's new