Devil's hand die off?

Andamaite

Community Member
View Badges
Joined
Dec 25, 2025
Messages
64
Reaction score
85
Location
Oklahoma
Rating - 0%
0   0   0
Another discounted softie from a big box store. It looked okay freshly acclimated with a few areas that gave me pause, but I knew these had a tendency to throw tantrums and it wasn't exactly in a great setup at the store. The first photo with no polyp extension is day one (I think) and the second is from about a week later.

Screenshot_20260214-081309~2.jpg IMG_20260213_121024068_HDR~2.jpg

Do I need to be worried about it continuing to decline? The parts that are perked up are perking up more day by day. Should I just let it figure out what's dead and what's alive on its own without worrying about it and re-mount if it falls off?

Would starting on some supplemental dosing give it a boost to regrow a bit faster?

This light I'm using was sold as being PAR 80 at 12" and this is about 6" from the light. It seems to be "low end" of enough for leather? This tank was just intended to get me back into the hobby with macro and inverts, but I ain't ever been able to turn down a deal unfortunately.

My prior nano never had leather coral so it's all new to me. Thank y'all in advance for the help.
 

Mr. Mojo Rising

10K Club member
View Badges
Joined
Feb 14, 2021
Messages
13,503
Reaction score
16,059
Location
Toronto
Rating - 0%
0   0   0
Its a bit low for lighting but IME water movement is almost more important to leathers than lighting. Seeing the seaweed or macro in the back gives me the impression its low flow or no flow, I think this is the main problem. my opinion
 
OP
OP
Andamaite

Andamaite

Community Member
View Badges
Joined
Dec 25, 2025
Messages
64
Reaction score
85
Location
Oklahoma
Rating - 0%
0   0   0
Its a bit low for lighting but IME water movement is almost more important to leathers than lighting. Seeing the seaweed or macro in the back gives me the impression its low flow or no flow, I think this is the main problem. my opinion
It's directly under the outflow from the return pump. I had it unplugged for photos. Ordinarily it's getting wiggled around a bit and the water is very nearly splashing over the front of the tank. I could angle the nozzle toward it more if that might be helpful.
 
Last edited:
OP
OP
Andamaite

Andamaite

Community Member
View Badges
Joined
Dec 25, 2025
Messages
64
Reaction score
85
Location
Oklahoma
Rating - 0%
0   0   0
I heeded "needs more flow" and shifted the nozzle a bit to blow directly at it, versus past it. It went from gently wiggling to getting smacked around and it looks far happier. I knew they liked flow but I had no idea they liked "deep sea gorgonian" flow.

I'll be looking into a larger return pump for now and an additional circulation pump to aim at it after I get the slightly larger nano set up and ready.

Thank you very much for the assistance @Mr. Mojo Rising

IMG_20260215_153251579_HDR~2.jpg
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 10 8.4%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 8 6.7%
  • Feed nori to support CUC

    Votes: 39 32.8%
  • Feed herbivore pellets to support CUC

    Votes: 42 35.3%
  • Allow attrition to balance CUC and algae

    Votes: 51 42.9%
  • Provide macro algae to feed CUC

    Votes: 8 6.7%
  • Introduce CUC predators

    Votes: 1 0.8%
  • Other (please explain)

    Votes: 12 10.1%
Back
Top