Ok ats are all the rage rn in the hobby. Ive been meaning to do this diy thread on ats.
I enjoy diy in the hobby and think its part of building my tanks. Especially custom displays ect.
I also believe if you want something done right. You have to do it yourself. Lol.
Heres a little write up on diy ats. This one is designed to be fed off of your return pump or be T'd of your main return line.
Things youll need and tools
-Pvc
-Dremel and cutter disc. I paid $30 or so on amazon...
-gate valve of approptiate size
-knitting mesh
-hole saw bit
-tubing
-pump
-zip ties
-small rectangle.plastic piece with two holes. *not required or needed but recommended*
Pretty.basic simple stuff.
Pics and details to follow
I enjoy diy in the hobby and think its part of building my tanks. Especially custom displays ect.
I also believe if you want something done right. You have to do it yourself. Lol.
Heres a little write up on diy ats. This one is designed to be fed off of your return pump or be T'd of your main return line.
Things youll need and tools
-Pvc
-Dremel and cutter disc. I paid $30 or so on amazon...
-gate valve of approptiate size
-knitting mesh
-hole saw bit
-tubing
-pump
-zip ties
-small rectangle.plastic piece with two holes. *not required or needed but recommended*
Pretty.basic simple stuff.
Pics and details to follow