DEWREEFING presents 225g SPS build

[Goodair]

Thought you were sticking to 4 socks, what made you change to 2?

 

[DEWreefing]

Either way I would have had to buy a new hole saw bit because mine came up missing. So I got impatient tore a sock apart traced the hole then cut them out with my jig saw. Funny the only tools I used for the whole job was my jig saw and drill

 

[Goodair]

Nice, holes came out pretty good considering you used a jigsaw!

 

[DEWreefing]

Yeah and now my router is gone so I have to sand the edges by hand now ***

 

[DEWreefing]

All done wonder if I should flame polish the edges. Not to shabby for only being the second time working with acrylic

 

[DEWreefing]

Almost finished just need to drill the holes for the overflow bulk heads.

 

[DEWreefing]

Time to start the plumbing.

 

[DEWreefing]

Alright sump is done just have to fill the tank with water now. Ato hold 13 gallons with no leaks also finished my tab for ato hose holder and probe holder. Cord management was drilled and cut as well.

 

[DEWreefing]

Almost time to rock this boat

 

[DEWreefing]

1/2 way filled should have been done already.

 

[cmaxwell39]

Nice job on the sump build. What are you going to be using for lights?? Following along for sure.

 

[DEWreefing]

Nice job on the sump build. What are you going to be using for lights?? Following along for sure.

4 hydra 64hd and 4 t5 2 blue plus and 2 true actinitic