Well since there is a new forum for frag tanks I thought I would document my first attempt at building an acrylic frag tank. I bought an acrylic tank that was a fixer upper for $20. It was about 45 gallons and after getting it home it looked like the seams were really bad and leaking.
So I cut the tank apart and I started to clean everything up. I may try to polish out some of the scratches just to get a feel for how it works. I have settled on cutting down the panels so the tank will end up being 35"×21"×11" which should give me a nice little 35 gallon tank.
Weld-on 4 came in the other day so hopefully I can start the assembly process in another week or two.
So I cut the tank apart and I started to clean everything up. I may try to polish out some of the scratches just to get a feel for how it works. I have settled on cutting down the panels so the tank will end up being 35"×21"×11" which should give me a nice little 35 gallon tank.
Weld-on 4 came in the other day so hopefully I can start the assembly process in another week or two.