Do Green Star Polyps consume phosphate excessively?

divetoday

Active Member
View Badges
Joined
May 9, 2017
Messages
118
Reaction score
109
Location
Fort Lauderdale
What state or country do you live in
Florida
Rating - 0%
0   0   0
Okay, okay. I know all corals consume nutrients, but I have a strange situation. I have a 30 gallon BB cube that is about 40% covered in GSP. There are 4 fish (cow fish, damsel and two percs) in addition to some RBTA and zoas. The Hanna checker reliably tells me this tank is at 0.00 phosphate. I can move the nitrates on the tank by increasing feeding but not the phosphates. I have another tank I use the same checker on and get results in the expected 0.05 to 0.1 range so I don’t think it’s the checker or the reagent. I have heard that some people use Xenia in large refugia for phosphate control, but not GSP. Has anyone else seen this reported?
FC500B6B-9228-4BA4-9DC1-F4F3E127C10C.jpeg
 
It’s not the green star polyps.

It may be any bare calcium carbonate surfaces, such as rock or sand. It can bind a tremendous amount of phosphate before reaching equilibrium with the water.
 
Thanks Randy. It’s an established tank, bare bottom with some live rock but not a ton.
 
Get that phosphate up! 0 phosphate will kill photosynthetic organisms. You generally want a minimum of 0.03ppm at all times.

The GSP isn't helping matters. Fast-growing corals are good at using up nutrients.
 
Interesting. I guess I'll go with what Randy said but I was thinking "maybe."

My phosphates seemed to plummet when I added 7 zoas.
Could be due to half my rock being dry rock when I did tank transfer 8 months ago but I didn't notice phosphates fall until I added zoas a couple months later.
 
7 zoas wouldn't plummet phosphates in anything larger than a shot glass.

(Edit: assuming you meant 7 polyps or 7 frags, not 7 large colonies.)
 
What I meant was that gsp is not taking up unusually large amounts of phosphate, but I agree it can be a fast grower and will thus take up N and P in proportion to it’s growth. :)
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 38 58.5%
  • Automated dosing

    Votes: 4 6.2%
  • Mechanical filtration / roller filter

    Votes: 4 6.2%
  • Automated water testing

    Votes: 3 4.6%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 9 13.8%
  • Controller and remote monitoring

    Votes: 3 4.6%
  • Leak detection and emergency shutoff

    Votes: 1 1.5%
  • Automatic water changes

    Votes: 2 3.1%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.5%
Back
Top
Home
Post thread…
Market
What's new