Easy maintenance media reactors?
- Thread starter becky46
- Start date
- Tagged users None
leonardomanzano
Active Member
I use the phosban reactor by two little fishies
you can put other things in it other than GFO but Its very easy to unscrew the top and empty out the reactor you can also put it at an angle so that the water in the reactor flows back into the sump without having to open it.
PhosBan Reactor 550
The PhosBan Reactor 550 is designed to push water upwards from the bottom and through the media. This forces an even distribution of water throughout the media and prevents channeling from occurring. The PhosBan 550 media reactor has a low profile and built-in hanging bracket making it ideal for...
www.bulkreefsupply.com
also, this does leak so you will have to angle it into the sump so that the water drips back into the tank rather than the floor.
monkeyCmonkeyDo
7500 Club Member
I use the biomaxx XL bio pellet reactor and it's easy maintence after adding the slide loc nuts instead of the plastic thumb screws it comes standard with. About a $35 upgrade but we'll worth it if u don't wanna deal with wet paper towels and such.
D
D
I’ll second @leonardomanzano - i use 2 x TwoLittleFishies reactors in my 125 gallon reef tank and they work like a treat! Dear cheap to buy, solidly build and easy ho maintain and change media.
Thats what you need to go fore, definitely!
Can you get better build reactors? Sure! Do you need it, apart from the gear head in you? NO!
Thats what you need to go fore, definitely!
Can you get better build reactors? Sure! Do you need it, apart from the gear head in you? NO!
backbayreef
2500 Club Member
I’ve used various media reactors (including the TLF ones) but moved away from them due to the maintenance nightmare. I’m too lazy to unscrew, rinse, and replace the media. Oh yeah — don’t forget the pump and adjusting tumbling speed. As for carbon, I used to run it in reactors but been having success with disposable nylon bags, placed in high flow areas.
For PO4 control, I use PhosphateRx every 6mos to knock it down. I believe that I’ve lost many SPS frags due to GFO when PO4 bottomed out. It’s hard to measure / calculate how much PO4 to take out. Instead, I just drop 60-80 drops of PhosphateRx every 6mos — extremely easy and zero mess!
Anyway, that’s what I do and things seem to be working well. Good luck with your tank!
For PO4 control, I use PhosphateRx every 6mos to knock it down. I believe that I’ve lost many SPS frags due to GFO when PO4 bottomed out. It’s hard to measure / calculate how much PO4 to take out. Instead, I just drop 60-80 drops of PhosphateRx every 6mos — extremely easy and zero mess!
Anyway, that’s what I do and things seem to be working well. Good luck with your tank!
backbayreef
2500 Club Member
What I’m saying is: say no to media reactors! They are too messy to deal with. I went with disposable nylon bags in high flow areas. Just my 2c
If you still prefer media reactors, I would agree with others on the TLF ones - been around for years and rock-solid build quality. Sorry, I personally don’t have experience with BRS reactors.
I have this and have used it for carbon and GFO. I also have had several tlf reactors. Both are good but I prefer the BRS. I find it more solid and easier to reload.
