Emergency-Broken Center Brace

xabo

Valuable Member
View Badges
Joined
Aug 21, 2009
Messages
1,036
Reaction score
515
Location
Wash. D.C.
Rating - 100%
1   0   0
Have a 225 gal. Sephora tank. Center brace has come a loose from the frame on one side of the tank. Can Gorilla Glue contact adhesive be used to reattach it?



Sephora.jpeg
 
OP
OP
xabo

xabo

Valuable Member
View Badges
Joined
Aug 21, 2009
Messages
1,036
Reaction score
515
Location
Wash. D.C.
Rating - 100%
1   0   0
There's about a 1/4" gap between end of the brace and the frame. Looks like the adhesive gave way.
 

ryanjohn1

Valuable Member
View Badges
Joined
Nov 22, 2020
Messages
1,659
Reaction score
3,068
Location
quakertown
Rating - 0%
0   0   0
Sounds like tank bowed, is it a brand new tank?
 

Fungusamongus

Active Member
View Badges
Joined
Mar 1, 2023
Messages
263
Reaction score
445
Location
Tacoma
Rating - 0%
0   0   0
You could also use some additional plastic on each side of the current brace and glue, or fuse, those down to to each end and along the current brace. That would give more support. I dont know how strong it would be or how long it would last considering the volume. In the end a new tank would probably be best.
 

Reefering1

Valuable Member
View Badges
Joined
May 20, 2022
Messages
1,662
Reaction score
1,737
Location
Usa
Rating - 0%
0   0   0
For any(best? ) chance of long lived repair, I'd say you need to drain the water from tank, clean with alcohol maybe sand it a bit to roughen the surface for more bite from adhesive, and clamp the tank from front to back and clamp the brace to the trim. Imo allow it to fully cure before removing clamps and filling with water
 

Rick's Reviews

2500 Club Member
View Badges
Joined
May 17, 2021
Messages
2,738
Reaction score
1,750
Location
Nottingham
Rating - 0%
0   0   0
Yes the adhesive gave away. Nothing is broken. There's a ledge where the glass sits atop of the frame.
I would love to suggest to strap it and glue it but unfortunately this is a possibility that your aquarium is breaking down and showing signs of pressure breakage.

Your aquriam in one way or another will burst.

I strongly suggest removing water to ease pressure, maybe 50%.
Then look to alternative/new or used aquarium
 

TurboTang

Active Member
View Badges
Joined
May 21, 2020
Messages
254
Reaction score
347
Rating - 0%
0   0   0
Agreed - need to lower water level fast. Don't try to fix this while full of water
 

Reign1

Active Member
View Badges
Joined
Dec 12, 2022
Messages
430
Reaction score
495
Location
US
Rating - 0%
0   0   0
I had a aquairum do this . Drained it lower and placed a clamp on it until I was able to order a new aquarium.
 

mfinn

likes zoanthids
View Badges
Joined
Jul 22, 2006
Messages
11,909
Reaction score
8,422
Location
Olympia, WA.
Rating - 100%
5   0   0
If this was my tank I would use a bar clamp and pull the tank back into shape.
Then order some Momentive 103 or 108 adhesive.
Then drain the water down a few inches, make sure the area under the brace is dry and apply a liberal amount of the momentive adhesive on the tank and brace.
Clamp it back up tight and and let it set for a good 9-10 days.
Remove the clamp and see if it holds.

And while you are waiting, start shopping for a new tank.
 
OP
OP
xabo

xabo

Valuable Member
View Badges
Joined
Aug 21, 2009
Messages
1,036
Reaction score
515
Location
Wash. D.C.
Rating - 100%
1   0   0
Can you please tell us the age of tank
About 2-3 years old.
First, you need to get enough water out of that where the bow goes away so you can get things situated where they were before attempting to fix anything. Don't try forcing it with water in it or you may be very sorry.
That's my plan.

Along the frame, there is a ledge about 1/8-3/16" wide. The glass center brace sits atop of this ledge. It appears that the glass was held in place with silicone.


IMG_1657.JPG
IMG_1656.JPG
IMG_1656.JPG
IMG_1655.JPG
 

CBonito

Valuable Member
View Badges
Joined
Aug 20, 2023
Messages
1,114
Reaction score
1,301
Location
Detroit Area
Rating - 0%
0   0   0
About 2-3 years old.

That's my plan.

Along the frame, there is a ledge about 1/8-3/16" wide. The glass center brace sits atop of this ledge. It appears that the glass was held in place with silicone.


IMG_1657.JPG
IMG_1656.JPG
IMG_1656.JPG
IMG_1655.JPG
You're going to want to clean that and the brace like super good before trying to fix it so you get the best bond, then let it cure for a few days before putting any pressure on it. I hate telling people they should get a new tank because that's almost insulting to hear, but I would at least prepare for the possibility that you may have no choice.

It sucks that people have to go through stuff like this.
 

Just grow it: Have you ever added CO2 to your reef tank?

  • I currently use a CO2 with my reef tank.

    Votes: 8 5.4%
  • I don’t currently use CO2 with my reef tank, but I have in the past.

    Votes: 5 3.4%
  • I have never used CO2 with my reef tank, but I plan to in the future.

    Votes: 8 5.4%
  • I have never used CO2 with my reef tank and have no plans to in the future.

    Votes: 122 81.9%
  • Other.

    Votes: 6 4.0%
Back
Top