Error on ATO

[TWYOUNG]

After experiencing a disconnect from fusion I've had to reprogram my Apex and keep getting this hourly error alarm. Can anyone see my error. Thank you.

 

[blaxsun]

By default Fusion sets up an alarm for the ATO. This shows up in my outlet list as FMM_Alarm, so you just need to find it and disable.

Is this one of the new Apex A3s?

 

[TWYOUNG]

By default Fusion sets up an alarm for the ATO. This shows up in my outlet list as FMM_Alarm, so you just need to find it and disable.

Is this one of the new Apex A3s?

It's an A2 and I'm needing to reprogram everything after a disconnect from fusion. Attached is the program I have running and it still keeps switching the tile off and alarming exactly every hour. This makes me suspect it's related to the line Min Time 060:00 then OFF. Thing is I intentionally overfilled the sump so the ATO hasn't run in HOURS and the tile keeps switching off and alarming.

 

[blaxsun]

Change the following line from this to this:

When ON > 005:00 Then OFF
When ON > 010:00 Then OFF

This is a "kill" code that prevents the ATK from running for more than 5 minutes. Chances are you're hitting 5 minutes and permanently disabling the ATO (so 10min should fix this). Note that the low/high sensors should trigger the PMUP off (this is just a backup).